This study presents numerical simulations and experimental verification of a vibration-based damage detection technique. Health monitoring of a submerged pipe's girth-weld against an advancing notch is attempted. Piezoelectric transducers are bonded on the pipe for sensing or actuation purposes. Vibration of the pipe is excited by two means: (i) an impulsive force; (ii) using one of the piezoel...

As one of the most common gear failure modes, tooth wear can produce nonlinear modulation sidebands in the vibration frequency spectrum. However, limited research has been reported in monitoring the gear wear based on vibration due to the lack of tools which can effectively extract the small sidebands. In order to accurately monitor gear wear progression in a timely fashion, this paper presents...

Structural vibration monitoring has received a lot of attention from the research community in the past few years. The objective is to create automatic structural assessment techniques that can be realized through programmed vibration analysis. Till now many vibration-based damage features have been proposed, yet to truly automate the damage identification process, reliable damage threshold con...

The Active Vibration and Noise Reduction (AVINOR) aeroelastic simulation code for helicopter rotor blades is described. AVINOR is a research code that has been developed at UCLA and the University of Michigan for the purpose of conducting computationally efficient aeroelastic response analyses while maintaining a level of fidelity so as to be suitable for preliminary design of helicopter rotor ...

This is the final report of a three-year. Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Recent advances in wireless. remotely monitored data acquisition systems coupled with the development of vibration-based damage detection algorithms make the possibility of selfor remotely-monitored structures and mechanical systems appear to be wit...

Fabrication, characterization and application of micro-/nano-rods/wires are among the hottest topics in materials science and applied physics. Micro-/nano-rod-based structures and devices are developed for a wide-ranging use in various fields of micro-/nanoscience (e.g. biology, electronics, medicine, optics, optoelectronics, photonics and sensors). It is well known that the structure and prope...

Compressors are a primary cause for numerous HV AC noise and vibration problems. Typically, vibration energy is transmitted from the compressor to the chassis through piping and isolation mounts. The design of these attachments is thus of paramount importance in determining the dynamic performance of a HV AC unit. Below certain frequencies, compressor vibration can be well described as a rigid-...

This paper presents the development of an active vibration control using direct adaptive controller to suppress the vibration of a flexible beam system. The controller is realized based on linear parametric form. Differential evolution optimisation algorithm is used to optimize the controller using single objective function by minimizing the mean square error of the observed vibration signal. F...