A fiber amplifier that generates nearly transform-limited sub-picosecond pulses and greater than 100 W average power at 1.3-GHz repetition rate is described. Modest stretching of the seed pulses allows the amplifier to be operated in the linear regime. The amplified and dechirped pulses exhibit excellent beam quality, and can be frequency-doubled to produce green pulses at 65 W average power. D...

The objective is to develop an amplifier with desired specifications. In this paper we have tried to explain how we designed an amplifier at 2.47 GHz for W-LAN application and had two options. They were whether to design a power amplifier (PA) or to design a low noise amplifier (LNA). The possibility of PA was eliminated by the fact that we were going to use it as the first block in receiver si...

In this paper two different Gm-C chopper amplifiers, aimed for signal amplification in implantable devices are presented. The first one is a pre-amplifier for ENG signals that was fabricated in a 1.5 μm technology. Measurements of this amplifier showed input noise of 1.2 nVHz and 2.5 μV offset with a power consumption of 28 mW. The second is a complete amplifier for EEG signals designed in a 0....

Nonlinearity estimation and spectral regrowth prediction are crucial to power amplifier linearization. The correlation techniques shown here can estimate amplifier nonlinearity and predict out-of-band power spectrum. Crosscorrelation is performed between the output envelope and a test sequence generated from the input signal and can be carried out in background during amplifier operations. The ...

We describe a Nd:YAG slab laser master oscillator power amplifier (MOPA) system that has been scaled to 104 W of output power at 1064 nm, single transverse mode. The amplifier system consists of rod amplifiers followed by edgeand end-pumped slab amplifiers. The MOPA output of 104 W was 89% fundamental TEM00 spatial mode with less than 3% depolarization. These results are a key milestone in the ...

A class E power amplifier including coupling coils is proposed for application in a wireless power transfer system using magnetic coupling. The proposed amplifier is directly connected to the coils with no discrete components for harmonic filtering and dc feeding, which could cause efficiency degradation of the amplifier. The system with the differential amplifier shows 6.95 W of transmitted po...

We demonstrate a high-power, picosecond, thulium-doped, all-fiber master oscillator power amplifier with average power of 120.4 W. The compact fiber oscillator is carefully designed with high repetition rate for the purpose of overcoming the detrimental effects of fiber nonlinearity in the later fiber amplifiers. The pulse duration of 16 ps at 333.75 MHz repetition rate results in a peak power ...

In this paper, a design and fabrication of a miniaturized 2.5 GHz 8 W power amplifier using selectively anodized aluminum oxide(SAAO) substrate are presented. The process of SAAO substrate is recently proposed and patented by Wavenics Inc. which uses aluminum as wafer. The selected active device is a commercially available GaN HEMT chip of TriQuint company, which is recently released. The optim...

We report the generation of up to 0.7 mW of narrow-linewidth (<60-MHz) radiation at 3.3 micrometers by difference frequency mixing of a Nd:YAG-seeded 1.6-W Yb fiber amplifier and a 1.5-micrometers diode-laser-seeded 0.6-W Er/Yb fiber amplifier in periodically poled LiNbO3. A conversion efficiency of 0.09%/W (0.47 mWW-2 cm-1) was achieved. A room-air CH4 spectrum acquired with a compact 80-m mul...

An optical parametric chirped pulse amplifier fully based on Yb lasers at 500 kHz is described. Passive optical-synchronization is achieved between a fiber laser-pumped white-light and a 515 nm pump produced with a 200 W picosecond Yb:YAG InnoSlab amplifier. An output power up to 19.7 W with long-term stability of 0.3% is demonstrated for wavelength tunable pulses between 680 nm and 900 nm and ...