In the present study, the high viscosity of the jatropha curcas oil was decreased by preheating. The effect of fuel inlet temperature on performance of diesel engine is evaluated. A single cylinder, four stroke, constant speed, air cooled, direct injection diesel engine developing a power output of 3.7 kW at 1500 rev/min typically used in agricultural sector was tested using neat jatropha oil a...

The heating value of fuel is one of its most important physical properties, and is used for the design and numerical simulation of combustion processes within internal combustion (IC) engines. Recently, there has been a significant increase in the use of dual fuel and blended fuels in compression ignition (CI) engines. Most of the blended fuels include biodiesel as one of the constituents and h...

Citation: Barnhill WC, Gao H, Kheireddin B, Papke BL, Luo H, West BH and Qu J (2015) Tribological bench and engine dynamometer tests of a low viscosity SAE 0W-16 engine oil using a combination of ionic liquid and ZDDP as anti-wear additives. Front. Mech. Eng. 1:12. doi: 10.3389/fmech.2015.00012 Tribological bench and engine dynamometer tests of a low viscosity SAE 0W-16 engine oil using a combi...

The piston ring assembly is one of the key parts of internal combustion engine. Its performance decides engine power loss to over come friction force and determines the performance of the whole engine. As per the literature review it is reported 40 to 50 % of the total mechanical friction losses in piston ring cylinder wall interface. The present work mainly focused on study of basic tribologic...

The most commonly used method for biodiesel preparation is via transesterification of vegetable oil using alkaline catalysts. Biodiesel yield and oil conversion are affected by operating conditions including the catalyst formulation and concentration. Application of alkaline catalysts can also lead to undesired soap formation. This study evaluated the alkaline catalyst effects on biodiesel yiel...

nowdays, production of high quality engine oils is one of the worries of our country’s engine oil industry. in this study, the behavior of four commercial polymers used in nation motor oil industry in obtaining the best viscosity index improver was investigated. in this regard, viscometric behavior, shear stability and polymers’ performance for engine cranking were compared at low temperature. ...

This paper presents the modeling and control of a waste heat recovery system for a Euro-VI heavy-duty truck engine. The considered waste heat recovery system consists of two parallel evaporators with expander and pumps mechanically coupled to the engine crankshaft. Compared to previous work, the waste heat recovery system modeling is improved by including evaporator models that combine the fini...