Q690E high strength low alloy (HSLA) steel plays an important role in offshore structures. In addition, underwater local cavity welding (ULCW) technique was widely used to repair important offshore constructions. However, the high cooling rate of ULCW joints results in bad welding quality compared with underwater dry welding (UDW) joints. Q690E high strength low alloy steels were welded by mult...

The effect of different austenite grain size and different cooling rates on the austenite to ferrite transformation temperature and different ferrite morphologies in one Nb-microalloyed (HSLA) steel has been investigated. Three different austenite grain sizes were selected and cooled at two different cooling rates for obtaining austenite to ferrite transformation temperature. Moreover, samples ...

In this research the role of alloying elements on the microstructure and mechanical properties of an as cast and hot rolled high strength low alloy (HSLA) steel was studied. Different compositions with different amount of copper in the presence of nickel, hot rolled and quenched in oil. Tensile test, hardness test, scanning electron microscope (SEM) and optical microscope (OM) were used to eval...

Strain induced precipitation in HSLA-100 steel was investigated by conducting hotcompression and relaxation tests at temperature range of 850°C to 1100°C and strain rate of 0.001s-1 to 1s-1. The absence of dynamic recrystallization at temperatures below 1000°C was attributedto the influence of dynamic precipitation. The stress relaxation tests showed that strain inducedprecipitation is possible...

This work demonstrates a novel application of ultrasound: measurement of magnetostriction, the change of length of a ferromagnetic material that accompanies a change in magnetization. The technique involves measuring ultrasonic waves generated by an electromagnetic acoustic transducer (EMAT), and it offers an alternative method of measuring magnetostriction in cases where it would not be feasib...

The review of non-destructive testing pressure vessel for compressed air is given, as well the assessment and analysis defects on integrity itself. focus here welded joints, most critical areas in vessels, especially if thickness large, like case considered (50 mm), cylindrical storage vessels made HSLA steel. Toward this end conventional NDT methods, such UT Radiography are used first phase re...