loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. one of the most important durability problems in diesel engines is due to the cracks valves bridge area. the purpose of this study is a thermo-mechanical analysis of cylinder heads of diesel engines using a two-layer viscoplasticity model. in this article, mechanical prope...

Based on the coupled thermo-mechanical model, a constitutive model for bulk metallic glasses (BMGs), which is generalized to the multi-axial stress state and considers the effects of free volume, heat and hydrostatic stress, has been modified in the present paper. Besides, a failure criterion of critical free volume concentration is introduced based on the coalescence mechanism of free volume. ...

In this paper, the causes of the crack initiation in cast iron bullion moulds in Meybod Steel Corporation are investigated and then some new geometrical models are presented to replace the current moulds. Finally, among the new presented models and according to the life assessment, the best model is selected and suggested as the replaced one. For this purpose, the three recommended moulds were ...

Abstract A chemo-thermo-mechanical problem is solved using a peridynamic approach to investigate crack propagation in non-reinforced concrete at early-age. In the present study, temperature evolution and variation of hydration degree conjunction with mechanical behaviour cement-based materials are examined. Firstly, new model introduced solve fully coupled chemo-thermal problems by satisfying t...

In the work presented in this contribution we have investigated the reduction of dynamical thermo-mechanical systems and we propose a new reduction method that can be seen as an extension of the common Craig-Bampton method [2] where multiphysics is now implicitly included in the projection basis. The efficiency of this new approach has been evaluated in multiple configuration of a representativ...

A combined experimental and numerical study of the effect of temperature on anisotropy in warm forming of AA 6016-T4 aluminum was performed. The anisotropy coefficients of the Vegter yield function were calculated from crystal plasticity models with an adequate combination of extra slip systems. Curve fitting was used to fit the anisotropy coefficients calculated at discrete temperatures. This ...

Dynamic response analysis of mechanical structures is usually performed by adopting numerical/analytical models. Finite element (FE) modeling as a numerical approach plays an important role in dynamic response analysis of complex structures. The calculated dynamic responses from FE analysis are only reliable if accurate FE models are used. There are many elements in real mechanical structures w...