The properties of composite resin for dental fillings were improved by development, but its weakness continues to be its wear strength. Several tests have been proposed to evaluate wear in composite resin materials. The aim of this study was to verify how polishing and the type of abrasive can influence the wear rate of composite resin. The test was carried out on two groups. In one group we em...

Non-water based fixed abrasive polishing was adopted to manufacture LBO crystal for nano precision surface quality because of its deliquescent. Ethyl alcohol was selected as the non-water based slurry solvent and ethanediamine, lactic acid, hydrogen peroxide was added in the slurry as a chemical additive, respectively. Effect of different additives with non-water based slurry on material remova...

Abstract Abrasive waterjet cutting is a manufacturing technology making use of high-speed with abrasive particles in suspension, for materials different mechanical properties. Product quality requirements are pushing towards an improvement tracking and stabilization methods the relevant process variables. Amongst those, jet kinetic power defines capability has significant impact on final cut fe...

THE ATTRITIOUS AND FRACTURE WEAR OF GRINDING WHEELS by Stephen Malkin Submitted to the Department of Mechanical Engineering February 1968, in partial fulfillment of the requirements for the degree of Doctor of Science A detailed investigation is made of the nature and extent-of grinding wheel wear in finish grinding. The wear is broadly classified as either attritious or fracture wear. Attritio...

in this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the sic abrasive slurry and al2o3, use of diamond paste as abrasive tool) in magnetic abrasive finishing process using designing of experiments on the external surface of cylindrical work pieces of stainless steel aisi 440c to get minimum surface roughness has been...

In present investigation the wear behavior of treated and untreated coir dust filled epoxy resin matrix composites were studied. The effect of treated and un treated coir dust concentration (10%, 20% and 30%), varying loads (10, 20 and 30N) and varying velocities (300, 400 and 500) on the abrasive wear rate of composite has been analyzed. The abrasive wear property of the composite is examined ...

Effects of abrasive and fiber components in a medium on the wear behavior of composite resins were evaluated. Calcium diphosphate and methyl cellulose were included in the medium as abrasive and fiber components respectively. A range of 0, 4, or 8% abrasive- or fiber-containing media were applied on a composite resin specimen during a simulated occlusal wear test. Four composite resins, Clearfi...

In the current work we present approach to study the mechanism of the cutting of abrasive grains in the grinding wheel using finite element analysis (FEA). The simulation process is done by separating two abrasive grains from the grinding wheels and the microprocess of material removal in the case of surface grinding is simulated. Modelling was done on the workpiece steel S-7 and material grain...

A material removal rate (MRR) model as a function of abrasive weight concentration has been proposed for chemical mechanical planarization/polishing (CMP) by extending a material removal model developed earlier in 2001 and 2002. With an increase of the weight concentration of abrasives, three regions of material removal exist: a chemically dominant and rapid increasing region, a mechanically do...

Abrasive water jet machining (AWJM) is a relatively new machining technique. Abrasive Water Jet Machining is extensively used in many industrial applications. AWJM is a nonconventional machining process where material is removed by impact erosion of high pressure high velocity of water and entrained high velocity of grit abrasives on a work piece. There are so many process parameter affect qual...