Sesame leaf and stem, as a kind of useless agricultural waste, was used as a sort of low-cost biosorbent for the removal of cadmium ions from aqueous solutions in batch and continuous modes. The biomass was characterized by Fourier transform infrared spectroscopy, scanning electron microscope and energy-dispersive X-ray analysis before and after adsorption. There were hydroxyl group, carboxyl g...

The adsorption behaviors of treated animal bone (TAB) with methylene blue dye (MBD) were studied. The aim of this study is to remove MBD from wastewater. A synthetic solution of 25 mg/L of the dye was used. The adsorption process was affected by contact time, doses of adsorbent, concentration of dye and temperature. It was carried out at constant pH (7.1). The optimum contact time was 90 min an...

Removal of cadmium from aqueous solution was studied by using Quetta pine (Pinus halepensis Mill.) leaves. Batch adsorption experiments were performed as a function of appropriate equilibrium time, pH, concentration of adsorbate and amount of adsorbent. The optimum pH required for maximum adsorption was found to be 7.0 and the maximum contact time for the equilibrium was 30 minutes at adsorbent...

Background and purpose: Cadmium is hazardous and non-biodegradable material entering the food chain. In this paper, the removal of cadmium from aqueous solutions by sunflower powder (the natural biosorbent) was investigated. Materials and Methods: The experiments were performed in a batch system. The effect of parameters such as contact time, pH, cadmium concentration and adsorbent dose were ev...

Calcium alginate beads doped with hydrazine sulphate-treated red mud are investigated as adsorbent for extracting lead ions from water using batch methods of extraction. Different extraction conditions are optimised for maximum lead extraction. Substantial amount of lead is removed, and the adsorption ability is found to be 138.6 mg/g. Surface characterization using FTIR, EDX, and FESEM confirm...

The objective of this research was to seek a cost effective solution to prepare adsorbents for nitrogen oxide from surplus sludge. Leaf litter and powder coal ash were used as cheap and easily available additives. An adsorbent for nitrogen oxide was prepared by pyrolysis of dried sludge mixed with zinc chloride. Under optimum pyrolysis conditions of 375°C for 90 min and a zinc chloride content ...

Batch sorption experiments were carried out using jackfruit seed powder (JSP), for the removal of Methylene Blue (MB) from dyeing synthetic effluent waste water. Effects of process parameters pH, adsorbent mass, adsorbate concentration, contact time and temperature were studied. The adsorption process attains equilibrium within 60 minutes. The amount of MB adsorbed per unit mass of the adsorben...

BACKGROUND Nowadays significant attention is to nanocomposite compounds in water cleaning. In this article the synthesis and characterization of conductive polyaniline/clay (PANI/clay) as a hybrid nanocomposite with extended chain conformation and its application for water purification are presented. METHODS Clay samples were obtained from the central plain of Abhar region, Abhar, Zanjan Prov...

The present work describes the synthesis of copper oxide nanoparticles (CuONPs) via a solution process with the aim of applying the nano-adsorbent for the reduction of methylene blue (MB) dye in alkaline media. These NPs were characterized via Field emission scanning electron microscopy (FE-SEM), X-ray diffraction, high-resolution Transmission electron microscopy (TEM), and ultra violet UV-visi...

A membrane composed of polyethylene terephthalate nanofiber and multi-walled carbon nanotubes (PET NF-MWCNTs) composite is used to adsorb methylene blue (MB) dye from an aqueous solution. Scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction techniques are employed study the surface properties adsorbent. Several parameters affecting adsorption (pH, MB initial ...