the removal ofxylenol orange from aqueous solution onto the coal ash was investigated at room temperature. the results show that the adsorption capacity of xylenol orange increased as the adsorption time increased and then equilibrium established after 30 min adsorption time. the results obtained revealed that the coal ash removed about 80 % of xylenol orange from the aqueous solution within 40...

The problem of reducing carbon dioxide emissions from flue gas, particularly gas originating coal-firing CFB systems, is currently an important challenge. Many centers around the world have tested post-combustion CO2 capture systems. One these operated using DR-VPSA adsorption technology (dual-reflux vacuum pressure swing adsorption), was under Strategic Project in Poland. this study originated...

Activated carbons fibers (ACFs) possess considerably uniform slit-shaped micropores of great pore volume. Molecules are strongly adsorbed in the micropores of the deep molecular potential well which stems from the overlapping of the molecule-pore wall interaction from opposite pore walls. Thus, a substantial adsorption of vapor begins at a very low-pressure region, giving rise to a monolayer ad...

In this paper, the simplified local density (SLD) theory is combined with the ESD equation of state to study the adsorption of solutes from supercritical carbon dioxide onto activated carbon. Firstly the model was applied to fit the adsorption of toluene+CO2 and benzene+CO2 by using only two temperature-independent parameters. It was shown that this theoretical model is capable of describing th...

The potential of water hyacinth ash for phenol adsorption from aqueous solution was studied. Batch kinetic and isotherm studies were carried out under varying experimental conditions of contact time, phenol concentration, adsorbent dosage and pH. The adsorption of phenol decreased with increasing pH. The Freundlich and Langmuir adsorption models were used for the mathematical description of ads...

Volumetric techniques were employed to study the adsorption of CO2 on a purified multi-wall carbon nanotubes (MWNT’s) sample, as a mesoporous material, at isothermal conditions of 288, 293 and 298 K and pressures ranging from 30 to 150 kPa. Langmuir, Freundlich and Sips equations were used to represent the isotherms. Also the parameters of these fitted isotherm models have been determined. The ...

in this study adsorption of 1-chloro-4-nitrobenzene (cnb) from aqueous solutions onto multi-walled carbon nanotubes (mwcnts) was surveyed. the effect of some key parameters such as ph (2-10), carbon nanotubes dosage (0.02-0.1 mg/250ml), cnb concentration (2- 16 mg/l), and temperature (20,30,40,50°c) were investigated. the results showed that, the variation of initial ph and cnb concentration ex...

Copper trimesate (Cu-BTC) MOF has been pointed out as a promising adsorbent for separating carbon dioxide from methane. However, MOF’s need to be shaped prior to their use in packed bed adsorbers in order to reduce pressure drop; on the other hand, the production of mechanically resistant shaped bodies reduces their adsorption performance. In this work, Cu-BTC tablets provided by BASF are evalu...

The present work was undertaken to evaluate the feasibility of nickel (II) removal from aqueous solution by adsorption onto a biopolymer adsorbent. The adsorbent was prepared using modification of mesoporous silicate SBA-15 with alginate biopolymer (alginateSBA-15) by encapsulation method. Morphological structure of the obtained nanocomposite adsorbent was characterized by XRD, scanning electro...