This paper is focused on the analysis of stress-strain and displacement for compressive load on the fibrereinforced composite laminates. Three different orientations of fibers are analyzed with and without the circular cut-outs. Also different dimensions of circular cut-outs are applied on the laminates at different compressive loading conditions. This analysis is carried out using the finite e...

Arrays of microcantilevers are increasingly being used as physical, biological, and chemical sensors in various applications. To improve the sensitivity of microcantilever sensors, this study analyses and compares the deflection and vibration characteristics of rectangular and trapezoidal profile microcantilevers. Three models of each profile are investigated. The cantilevers are analyzed for m...

This study proposes a new microcantilever design with a rectangular hole at the fixed end of the cantilever that is more sensitive than conventional ones. A commercial finite element analysis software ANSYS is used to analyze it. The Stoney equation is first used to calculate the surface stress induced moment, and then applied to the microcantilever free end to produce deflection. The stress an...

The rolling process of precision profile used for piston ring is simulated by large general-purpose explicit dynamic finite element analysis software ANSYS/LS_DYNA. The modeling of finite element models, the selection of material models and element types, the meshing of the model are introduced in detail. The rolling metal flow rulers of each pass are gained. The deformation of rolled piece and...

An effort made towards the performance improvement for an XY micromanipulator featuring parallel architecture and flexure hinges has been presented in this paper. Through the implementation of four steps evolution of the original structure, a new manipulator with decoupled motion is finally obtained, which owns an enlarged workspace and eliminated stiffening and buckling phenomena. The merits o...

A novel compact dielectric loaded Exponentially Tapered Slot (ETS) antenna using Substrate Integrated Waveguide (SIW) technology is presented in this paper for Millimeter (Mm) wave wireless communication applications. The dielectric loaded ETS antenna and compact SIW feed are fabricated on a single substrate. The compact SIW feeding structure results in a considerable reduction in size and elim...

In this paper, symmetric water entry of twin wedges is investigated for deadrise angle of 30 degree. Three numerical simulation of a symmetric impact, considering rigid body dynamic equations of motion in two-phase flow is presented. The two-phase flow around the wedges is solved by Finite Element based on Finite Volume method (FEM-FVM) which is used in conjunction with Volume of Fluid (VOF) sc...

The recent advances in computational fluid dynamics (CFD) can be useful in observing the detailed hemodynamics in cerebral aneurysms for understanding not only their formation and rupture but also for clinical evaluation and treatment. However, important hemodynamic quantities are difficult to measure in vivo. In the present study, an approximate model of normal middle cerebral artery (MCA) alo...

The effect of fibre orientation on buckling behaviour in a rectangular composite laminate with central circular hole under uniform in-plane loading has been studied by using finite element method. The critical buckling loads with different fibre orientation in an orthotropic composite laminate (E-glass/epoxy) were obtained. The deformation behaviour of the plate is shown for modes, i=1,2. Studi...

In this study, ANSYS finite element software is used to simulate the temperature and stress field in the laser powder deposition process. The model is used to determine the effect of the deposition pattern on the final stress distribution. Four deposition patterns are defined to cover the same area: long bead, short bead, spiral in, and spiral out. The results show that the deposition pattern s...