A 2-dimensional, elastic-plastic finite element model has been developed to simulate plasticity induced crack closure in slanted and deflected cracks growing outside the small scale yielding (SSY) regime. The finite element model allows for contact between deformable surfaces to capture the complex contact interaction between the crack faces. Coulomb’s friction law has been used to model fricti...

BACKGROUND Crack cocaine smoking is associated with an array of negative health consequences, including cuts and burns from unsafe pipes, and infectious diseases such as HIV. Despite the well-established and researched harm reduction programs for injection drug users, little is known regarding the potential for harm reduction programs targeting crack smoking to reduce health problems from crack...

DC electric potential technique has been used to monitor crack growth in conductive materials. A constant DC current is passed through these materials and the crack length is measured through the changes in the electrical voltage at the crack mouth. However, this method is not applicable in crack growth measurement in nonconductive materials or adhesively bonded joints. For these materials, a n...

Pre-existing cracks significantly influence the macro-mechanical properties of rock. The and crack propagation process brittle materials with a 3D internal were investigated PFC3D simulation in this paper. To determine micro-parameters, micro-parameters on ultimate failure mode was discussed. SJM’s parameters had little mode. Peak axial stress changed greatly by strength friction coefficient, m...

in this work, the mechanism for fracture of brittle substances such as rocks under a uniform normal tension is considered. the oriented straight micro-cracks are mostly created in all the polycrystalline materials resulting from the stress concentrations. the present work focuses on the interactions of the pre-existing micro-cracks, which can grow and propagate within a rock-like specimen. the ...

This paper proposes a reliable and cost-effective two-phase methodology to predict crack propagation life in generic two-dimensional (2D) structural components. First, the usually curved fatigue crack path and its stress-intensity factors are calculated at small crack increments in a specialized finite-element software, using automatic remeshing algorithms, special crack tip elements and approp...

Image processing technologies are proposed to quantify crack patterns. On the basis of the technologies, a software “Crack Image Analysis System” (CIAS) has been developed. An image of soil crack network is used as an example to illustrate the image processing technologies and the operations of the CIAS. The quantification of the crack image involves the following three steps: image segmentatio...

To better understand the relationship between the nucleation and growth of defects and the local stresses and phase changes that cause them, we need both imaging and stress mapping. Here, we explore how this can be achieved by bringing together synchrotron X-ray diffraction and tomographic imaging. Conventionally, these are undertaken on separate synchrotron beamlines; however, instruments capa...