A B S T R A C T Pump shafts used for power generation are susceptible to fatigue cracking while often in near-continuous operation. Technology based on torsional vibration is under development for condition-based assessment of shaft health. The focus of this paper is on the relationship between a crack, which propagated due to bending loads, and the torsional stiffness of the shaft. An analytic...

Cavitation normally causes severe damage in hydraulic machinery such as pumps, valves and so on. However, cavitation impact can be utilized to surface treatment to improve fatigue strength of metallic materials in the same way as shot peening. A peening method using cavitation impact was named as “cavitation shotless peening” or “cavitation peening” as shots are not required. As increase of sur...

Rapid progress in the reduction of substrate thickness for silicon-based microelectronics leads to a significant reduction of the device bending stiffness and the need to address its implication for the thermo-mechanical fatigue behavior of metallization layers. Results on 5 µm thick Cu films reveal a strong substrate thickness-dependent microstructural evolution. Substrates with hs = 323 and 2...

Bisphosphonates are commonly prescribed for treatment of osteoporosis. Long-term use of bisphosphonates has been correlated to atypical femoral fractures (AFF). AFFs arise from fatigue damage to bone tissue that cannot be repaired due to pharmacologic treatments. Despite fatigue being the primary damage mechanism of AFFs, the effects of osteoporosis treatments on fatigue properties of cortical ...

The fatigue life of tubular joints commonly found in offshore industry is not only dependent on the value of Hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stres...

M. Suliga, R. Kruzel, Czestochowa University of Technology, Czestochowa, Poland In the paper the influence of bidirectional bending on breaking force of steel cord has been assessed. Tests were carried out under laboratory conditions on three types of cord. It was found that bidirectional bending of steel cord cause the deterioration of strength properties and weakening of steel cord as a resul...

Rotating bending fatigue tests have been performed to evaluate the corrosion fatigue performance and its influence factors of 7075-T7351 Al alloy in different media, namely air and a 5.0 wt % NaCl aqueous solution. All samples were coated by microarc oxidation (MAO) coating technology; some samples were followed by an epoxy resin pore-sealing treatment. Microscopic analyses of the surfaces and ...

Tensile and fatigue properties of as-rolled and annealed polycrystalline Cu foils with different thicknesses at micrometer scale are investigated. Uniaxial tensile testing shows that with decreasing foil thickness the uniform elongation decreases for both as-rolled and annealed foils, while the yield strength and ultimate tensile strength increase for as-rolled foils, but those decrease for the...

Introduction: The use of plate systems represents a well-recognized technique for obtaining an effective compression, reduction and stabilization of the medial column of the foot. In this study, the in vitro fatigue strength of NCM (Medial Column Fusion) plates was determined and compared to a competitor’s equivalent foot system. Material: Two plates were investigated: Stryker VariAx 2 NCM Plat...