The thermodynamic functions for square-well gases evaluated till the third virial coefficient are investigated at an isobaric process. Some thermodynamic functions are analytically expressed as functions of intensive variables, temperature, and pressure. Some thermodynamic quantities for H2O are calculated numerically and drawn graphically. In critical states, the heat capacity, thermal expansi...

In the present paper, the characteristic atmospheric saturated pool boiling curve is qualitatively reproduced for water on a temperature-controlled long and thin copper strip using the coupled map lattice (CML) method known in non-linear spatio-temporal chaos dynamics. The pool height is 0.7mm, indicating that the boiling is of the thin-Ž lm type. The work modiŽ es the basic theoretical model p...

Experiments on the flow boiling heat transfer of almost pure CO2 and CO2-oil mixtures in horizontal smooth and micro-fin tubes have been carried out. The smooth tube is a stainless steel tube with an inside diameter of 3mm, and the micro-fin tube is a copper tube with a mean inside diameter of 3.04mm. Experiments were carried out at mass velocities from 190 to 1300kg/(ms), saturation temperatur...

This experiment demonstrates the use of colligative properties. The goal is to measure the molecular weight of a non-volatile solute by determining the concentration dependence of the boiling point elevation of a solution. The solvent used must be one of the compounds commonly referred to as volatile; that is, it must have an appreciable vapor pressure. One of the several useful aspects of coll...

Solutions of water and a salt or sugar make excellent experimental analog magmas for teaching concepts of igneous petrology because of the comparatively low temperatures involved, the simplicity of the apparatus needed, and the responsiveness of familiar chemical systems. Boiling of these aqueous solutions on a hot plate can be used to increase the concentration of a dissolved salt or sugar to ...

This paper reports the first integration of laser-etched polycrystalline diamond microchannels with template-fabricated microporous copper for extreme convective boiling in a composite heat sink for power electronics and energy conversion. Diamond offers the highest thermal conductivity near room temperature, and enables aggressive heat spreading along triangular channel walls with 1:1 aspect r...

Liquid agent transport was investigated around unheated and heated horizontal cylinders (to a near-surface temperature of approximately 423 K, i.e., well above the water boiling point) under ambient conditions. Experimental results are presented for a well-characterized, droplet-laden homogenous turbulent flow field, using water, methoxy-nonafluorobutane (i.e., HFE-7100, C4F9OCH3, with a boilin...

• Catalyst recovery can be performed in an energy-efficient way by reducing the volume of distillation streams. • Temperature-sensititve catalysts can be recovered at relatively mild temperatures from high boiling compounds. • By enabling continuous operation, reactions can be run under steady-state conditions, e.g., at limited conversions. • Catalysts based on expensive metals or ligands can b...

A single-chirality solid phase can be obtained in boiling solutions containing a racemic mixture of left- and right-handed enantiomorphous crystals due to dissolution-crystallization cycles induced by a temperature gradient. This phenomenon provides further insights into asymmetric amplification mechanisms under presumably prebiotic conditions.