The emerging switched-capacitor-based multilevel inverters offer interesting merits such as self-balancing of capacitor voltages and boosting voltage gain. While the switched capacitors (SCs) in these topologies are charged parallel with dc source, severe current spikes issue is inevitable, rendering them impractical at high power. This article proposes a novel T-type inverter that mitigates by...

This paper represents an effective method for optimal placement of DG and capacitor in distribution system. The main objective is to reduce the power losses in the system by placing capacitor and DG of optimal size and at optimal location. Distribution system connects the high voltage transmission system and low voltage side, hence it is necessary to keep the system at minimum losses for making...

A novel high step-up DC-DC converter with coupled-inductor and switched-capacitor techniques is proposed in this paper. The capacitors are charged in parallel and are discharged in series by the coupled inductor, stacking on the output capacitor. Thus, the proposed converter can achieve high step-up voltage gain with appropriate duty ratio. Besides, the voltage spike on the main switch can be c...

In the low voltage based renewable systems like PV and Fuel cell applications, step-up of output to drive loads is essential. For this, integration switched-capacitor (SC) units with dc-ac converters will have potential advantages improved efficiency, optimal switching devices, small size passive elements (L C) as compared traditional two-stage conversion system (dc/dc converter dc/ac converter...

A high step-up DC-to-DC converter that integrates an isolated transformer and a switched-clamp capacitor is presented in this study. The voltage stress of the main power switch should be clamped to 1/4 V by using the turn ratio and switched-clamp capacitor of an isolated transformer to achieve a high voltage gain. In addition, a passive clamp circuit is employed reduce voltage stress on the mai...

In this paper, a novel switched-capacitor DC-DC converter with pulse density and width modulation (PDWM) is proposed with reduced output ripple at variable output voltages. While performing pulse density modulation (PDM), the proposed PDWM modulates the pulse width at the same time to reduce the output ripple with high power efficiency. The prototype chip was implemented using 65 nm CMOS proces...

A fully differential opamp suitable for very-low voltage switched-capacitor circuits in standard CMOS technologies is introduced. The proposed two stage opamp needs a simple low voltage CMFB switched-capacitor circuit only for the second stage. Due to the reduced supply voltage, the CMFB circuit is implemented using bootstrapped switches. Minor modifications allow to use chopper stabilization f...

voltage control is one of the imperative issues in the smart distribution control system. while traditional distribution network is equipped with communication and monitoring equipment, the online voltage control can be perfectly achieved. with using these smart grid technologies, the distribution voltage control schemes should carry out intelligently and cover the undesirable effect of high pe...

In this paper, a modified auto zeroed integrator is used to design and simulate a low-voltage high-Q switched capacitor pseudo 2-path filter.  The filter is a sixth–order Chebyshev band-pass filter operating at sampling frequency of 1MHz and center frequency of 250 kHz with a quality factor of 50. The proposed filter has both low-voltage and high speed properties of the auto zeroed integrators ...