behaviors of stress corrosion cracking (scc)in martensitic stainless steel(aisi 420) and low carbon austenitic stainless steel (aisi 316l) have been compared under different conditions of temperature, environment (mgcl2), and strain rate. the results show that decreasing strain rate has detrimental effect on mechanical properties of both steels, including their strength and ductility. fractogra...

The present research was designed to evaluate an ultrasonic technique for measuring the drawability of low carbon steel sheets nondestructively. This technique, which uses electro magnetic acoustic transducers (EMAT's) is embodied in a fully automatic ultrasonic device called Ultra-Form, which was developed at Iowa State University (by the Center For Nondestructive Evaluation) in 1990. EMAT tra...

The carbon dioxide corrosion electrochemistry of mild steel has been studied in the presence of high CO2 partial pressures and acetic acid (HAc). Potentiodynamic sweeps, linear polarization resistance (LPR) and weight loss (WL) experiments have been conducted to investigate the effects of flow velocity, CO2 partial pressure, and acetic acid concentration on the corrosion rate of mild steel. Ele...

We apply immense strain to ultralong, suspended, single-walled carbon nanotubes while monitoring their Raman spectra. We can achieve strains up to 13.7 ± 0.3% without slippage, breakage, or defect formation based on the observation of reversible change in Raman spectra. This is more than twice that of previous observations. The rate of G band downshift with strain is found to span a wide range ...

Corrosion of steel reinforcement is the major cause of deterioration in concrete structures, and carbon dioxide and especially chlorides are the main causes of damage. The rate at which chloride ions diffuse through concrete is a major determinant of the durability of structures. If chloride ions reach the vicinity of the rebar, the passive film around the steel can start to break down and the ...

Kobe Steel has developed coal-based direct reduction (DR) technologies, the FASTMET, FASTMELT and ITmk3 processes, which reduce carbon composite agglomerates (pellets or briquettes) on the hearth of a rotary hearth furnace (RHF). This paper outlines the features of each process, status of technical development and commercialization. Also described is the contribution of these technologies to en...

A new permeameter has been built and is now available for testing samples of steel and other ferromagnetic materials for their magnetic characteristics such as permeability, remanent induction, coercive force and saturation induction. The present range of operation for the permeameter is from 0.5 Oe to 1250 Oe. Results are presented for two samples of low-carbon steel as well as some preliminar...

   A low carbon Al-killed Ti-added steel was produced in Mobarakeh Steel Complex in Iran. Mechanical properties and microstructural characterizations of steel in the as-cast, hot-rolled, cold-rolled and annealed conditions are presented. Dilatometery tests were carried out to measure the finishing and annealing temperatures of steel. It was found that the addition of small amounts of Ti increas...

The oxygen steelmaking process rapidly refines a charge of molten pig iron and ambient scrap into steel of a desired carbon and temperature using high purity oxygen. Steel is made in discrete batches called heats. The furnace or converter is a barrel shaped, open topped, refractory lined vessel that can rotate on a horizontal trunnion axis. The basic operational steps of the process (BOF) are s...

The current oscillatory behavior of epoxy-coated low carbon steel at anodic polarization was investigated in 3,5 % and 0,5 % solutions of NaCl. It was established, that the coated steel may show current oscillations at potentiostatic anodic polarization. The oscillations are of different type, period and amplitude and are more clearly expressed in 0,5 % solution. The presented results might be ...