Cavitation is one of the most well-known process faults that may occur in different industrial equipment especially centrifugal pumps. Cavitation also may happen in water pumps and turbines. Sometimes cavitation has been severe enough to wear holes in the impeller and damage the vanes to such a degree that the impeller becomes very ineffective. More commonly, the pump efficiency will decrease s...

This paper deals with a numerical and experimental study of ultrasound induced cavitation. On the basis of a computational analysis of Gilmore’s equation for the individual bubble dynamics, a slight decrease in the pressure radiated by a single bubble immediately before reaching the transient cavitation regime is predicted. Experiments presented in this paper confirm this observation. Therefore...

As an experimental quantitative method to assess erosion risk, the acoustic emission (AE) technique has been employed, for example, by Lloyds Register for more than a decade now to complement their borescopic cavitation observation at the ship scale. Boorsma and Fitzsimmons (2009) reported (see Fig. 1,) its correlation with borescope observed cavitation events appeared very positive and the loc...

The Keller-Miksis equation (KME) is commonly used for numerical studies of inertial and stable-inertial cavitation. However, experimental validation of KME under clinically relevant exposure settings is scarce, particularly in terms of the acoustic emission signal generated by the cavitation. In this paper, the KME is validated against a cavitation cloud collapsing f0/2 and f0/3 sub-harmonicall...

Hydrodynamic cavitation is a promising application in wastewater treatment due to its simple reactor design and capacity in large-scale operation. Theoretical studies including the basic mechanism of pollutant degradation, modeling of pressure distribution in the cavitation reactor, and bubble dynamics models coupled with chemical reactions are evaluated. Experimental setups with different cavi...

The corrosion of steel reinforcement in an aging highway infrastructure is a major problem currently facing the transportation engineering community, in particular bridge engineers. In the United States, maintenance and replacement costs are measured in billions of dollars. Further, the use of deicing salts has resulted in steady deterioration of bridge decks due to corrosion. These concerns ha...

For concrete bridge projects in marine environments, attention must be paid to the reinforcement corrosion problems caused by chloride intrusion. As kinds of functional admixtures, which can reduce the reinforcement corrosion rate, corrosion inhibitors are becoming very popular in China in new bridge projects. Corrosion inhibitors cover both inorganic and organic inhibitors. Nitrite is represen...

Corrugated, hydrophilic particles with diameters between 30 and 150 microm are found to cause cavitation inception at their surfaces when they are exposed to a short, intensive tensile stress wave. The growing cavity accelerates the particle into translatory motion until the tensile stress decreases, and subsequently the particle separates from the cavity. The cavity growth and particle detachm...