As an important influence factor of unban climate, unban water bodies take positive effect on the microclimate of surrounding area in summer. This paper firstly evaluated performances of five different models comparing with experimental results of windtunnel to find out which is most suitable for thermal prediction of micro-climate. Then, SKE model was selected to simulate four planning cases c...

In this work time dependent heat transfer flow through a kerosene based ferrofluid is considered. The flow is in a cylindrical geometry with the height and diameter of 10 mm. Computational fluid dynamics was used to simulate the system. In CFD simulations mixture model was applied to describe the behavior of the magnetic particles. A uniform magnetic field with different strengths and direction...

The most-widely used approach to explosion consequence analysis is the classical engineering method based on the combination of TNT equivalence, scaled distances and overpressure-based damage levels. This approach rests on established and easily comprehensible elements and permits a fast assessment of explosion consequences. There are however several limitations inherent in this approach. In co...

The modernization of computer technology and commercial computational fluid dynamic (CFD) simulation has given better detailed results as compared to experimental investigation techniques. CFD techniques are widely used in different field due to its flexibility and performance. Evaluation of pipeline erosion is complex phenomenon to solve by numerical arithmetic technique, whereas CFD simulatio...

Large-eddy simulation has been used to model the atmospheric boundary layer flowing through a span-wise periodic array of wind turbines. The wind turbines are modelled using a coupled simulation in which the FAST wind turbine simulation code from NREL operates within a CFD environment. The wind turbines are implemented in the flow-field using the actuator sector technique, and operate dynamical...

Lignite from Mae Moh mine is the largest source of solid fuel for electricity generation in Thailand. It is used in pulverized coal-fired boilers of a 2400 MW thermal power plant. Its high CaO content in ash is a major concern that can affect severe slagging. In this paper, potential of slag occurrence in the power plant was investigated by numerical simulation. The FactSage thermochemical pack...

This paper presents the comparison of various multicarrier Pulse Width Modulation (PWM) techniques for the Cascaded Hybrid Multi Level Inverter (CHBMLI). Due to switch combination redundancies, there are certain degrees of freedom to generate the five level AC output voltage. This paper presents the use of Control Freedom Degree (CFD) combination. The effectiveness of the PWM strategies develop...

Released flammable chemicals can form an explosible vapour cloud, posing safety threat in both industrial and civilian environment. Due to the difficulty in conducting physical experiments, computational fluid dynamic (CFD) simulation is an important tool in this area. However, such simulation is computationally too slow for routine analysis. To address this issue, a meta-modelling approach is ...

Heat exchangers are the important equipments with a variety of industrial applications including power plants, chemical, refrigeration and air conditioning industries. Helically coiled heat exchangers are used in order to obtain a large heat transfer area per unit volume and to enhance the heat transfer coefficient on the inside surface. This paper deals with the CFD simulation of helical coile...

In this paper, pollutant dispersion from point source was investigated numerically in an urban area. Numerical simulations were carried out using Computational Fluid Dynamics (CFD) models. The CFD models used for the simulation were based on the steadystate Reynolds-Average Navier-Stoke equations (RANS) with κ-ε turbulence models. A gas pollutant was emitted from a point source within the wake ...