The present paper studies the low-velocity impact testing of carbon-fibre reinforced-plastic (CFRP) pristine and patch-repair CFRP panels. Firstly, effect repeated impacts on damage growth is considered at energies 7.5, 10.5 30 J. Secondly, such tests lead to a single-sided, panel being manufactured by removing 40 mm diameter central hole, act as ‘damaged area’, from parent then adhesively-bond...

Abstract The joining techniques between carbon fiber reinforced polymer (CFRP) and metal are of great importance in many areas structural mechanics where the optimization weight, rigidity, strength is a necessity (such as aeronautics, vehicles, energy generation, biomechanics). As result, several types metal-composite joints have been manufactured using different methods, with 3D anchor solutio...

Some of the advantages that results from the structural strengthening of concrete slabs using prestressed fiber reinforced polymer (FRP) systems are as follows: the prestressed FRP delays the formation and propagation of cracks, and both the serviceability and the flexural capacity are increased. In this research program, the flexural performance of a concrete slab strengthened with a three-sta...

In the current study, the failure behavior of retrofitted steel structures was studied experimentally and theoretically with steel/CFRP double strap joints (DSJs) under quasi-static tensile loading. A series of DSJs with different bonding lengths are also considered and examined to experimentally assess the effective bond length. To predict the failure load values of the tested specimens, a new...

Low-speed wind energy conversion systems generally use Carbon Fiber Reinforced Plastic (CFRP) and Glass Fiber Reinforced Plastic (GFRP) as materials for rotor blade because these materials are light weight and hard but expensive. Layer Laminated Bamboo Composite (LLBC) is a bio-composite with bamboo base material which is abundant material and has a relatively lower price. This study investigat...

In this study, a multi-spot laser scanning thermography (MLST) system is developed for automated, rapid and long-range inspection of delamination in composite structures. First, thermal waves are generated by scanning a multi-spot laser beam over a target composite structure, and the corresponding thermal waves are measured by using an infrared (IR) camera. Then a thermal image processing algor...

This paper presents experimental research on structural behaviour of normal and recycled aggregate concrete filled steel tube (RACFT) columns externally strengthened with carbon fibre reinforced polymer (CFRP) sheets and subjected to axial loading. A total of 22 specimens were tested to investigate the influence of the following variables: (1) tube configurations, circular or square, solid or h...

The interlaminar shear response is studied for carbon nanofiber (CNF) modified out-of-autoclave-vacuum-bag-only (OOA-VBO) carbon fiber reinforced plastic (CFRP). Commercial OOA-VBO prepregs were coated with a CNF modified epoxy solution and a control epoxy solution without CNF to make CNF modified samples and control samples, respectively. Tensile testing was used to study the in-plane shear pe...

Debonding is one of the most important damage forms in fiber-reinforced composite structures. This work was devoted to the debonding damage detection of lap splice joints in carbon fiber reinforced plastic (CFRP) structures, which is based on guided ultrasonic wave signals captured by using fiber optic Doppler (FOD) sensor with spiral shape. Interferometers based on two types of laser sources, ...

To study the strengthening effect of carbon fiber composite materials (CFRP) on recycled concrete columns subjected to different levels seismic damage, four column specimens were designed for pseudo-static tests. The categorized as non-destructive without (prototype), strengthening, medium damage and severe based replacement rate aggregates level damage. characteristics deformation performance ...