Alumina is one of the most widely used adsorbent for removal of dissolved pollutants from waste water. Various chemical species, especially ions, are known to be adsorbed onto alumina. On the other hand, alumina is a typical support for catalysts. Many kinds of metal supported catalysts are prepared using alumina as their support. These two roles of alumina, i.e., as adsorbent and support, are ...

Alumina nanofibers were prepared by a technique that combined the sol-gel and electrospinning methods. The solution to be electrospun was prepared by mixing aluminum isopropoxide (AIP) in ethanol, which was then refluxed in the presence of an acid catalyst and polyvinylpyrolidone (PVP) in ethanol. The characterization results showed that alumina nanofibers with diameters in the range of 102 to ...

In order to determine the potential benefits and limitations of aluminide coatings, coatings made by chemical vapor deposition (CVD) on Feand Ni-base alloy substrates are being evaluated in various hightemperature environments. Testing of coatings on representative ferritic (Fe-9Cr-1Mo) and austenitic (type 304L stainless steel) alloys has found that high frequency thermal cycling (1h cycle tim...

The control of particle size distribution of fabricated alumina nanoparticles from general alumina that has a large geometric standard deviation (GSD) is studied. A thermophoretic separator was used to control the GSD of the fabricated alumina nanoparticles. Unevaporated particles and primary particles were separated to yield a small GSD for fabricated alumina nanoparticles. The fabricated alum...

Alumina nanorods were prepared from chromium-containing alumina sludge, and the effects of doping elements, such as Cr, Fe, and Mg, were researched. The results show that the crystal transformation of alumina is restricted by the doped Cr and facilitated by the doped Fe and Mg, which is transformed from θ-Al2O3 to α-Al2O3 in the calcination process. Meanwhile, the crystal transformation of alum...

The response to cycling contact fatigue load of a WC-6%Co carbide coated with Ti(C,N)/α-Al2O3 CVD multilayer was investigated in dry and wet conditions. Imprints conditions were characterized by small thin cracks forming circumference at the maximum radii imprint. damaged coating totally present final imprint test. Wet indentations showcase an area where α-Al2O3 layer has been removed throughou...

We compared results for the liquid-chromatographic determination of free norepinephrine and epinephrine in urine after purifying the catechols by the following methods: (a) acid-washed alumina, (b) weak cation-exchange resin (WCX), (c) a combination of weak cation-exchange resin followed by alumina (WCX-alumina), and (d) commercially available phenylboronic acid adsorbent. We evaluated analytic...

Cell adhesion, migration, and proliferation are significantly affected by the surface topography of the substrates on which the cells are cultured. Alumina is one of the most popular implant materials used in orthopedics, but few data are available concerning the cellular responses of mesenchymal stem cells (MSCs) grown on nanoporous structures. MSCs were cultured on smooth alumina substrates a...

Mesoporous alumina catalysts that incorporate nickel (Ni-Alumina) with different Ni/Al molar ratios of 1:2, 1:5 and 1:10 were synthesized by a one-step sol–gel method using lauric acid as a template. The prepared Ni-Alumina catalysts showed a relatively high surface area with a narrow pore size distribution after calcination at 700 ◦C; these effects were independent of the Ni/Al molar ratio. Al...

Abstract. Porous ceramics are recognized to have the potential be used for a wide variety of industrial applications, such as catalyst support and molten metal filter. It is common practice adjust shape in pre-sintering stage order obtain various configurations but some limitations due premature failure product, marked tool wear or inhomogeneous shrinkage during processing stages may arise, whe...