Over the last two decades, many studies on functional morphology have suggested that material properties of seaweed tissues may influence their fitness. Because hydrodynamic forces are likely the largest source of mortality for seaweeds in high wave energy environments, tissues with material properties that behave favorably in these environments are likely to be selected for. However, it is ver...

The modification of carbon fibers for improving adhesion between fibers and an epoxy resin in composite materials has become the focus of attention. In this work the carbon fiber coating process has been devised in a way preventing the stiffening and clumping of fibers. To improve interactions between coated fibers and a resin in composites, four types of silica coatings with different organic ...

A rapid and simultaneous separation of cationic and anionic peptides and proteins in a glass microfluidic device that has been covalently modified with a neutral poly(ethylene glycol) (PEG) coating to minimize protein adsorption is presented. The features of the device allow samples that contain both anions and cations to be introduced from a central flow stream and separated in different chann...

Abstract Based on the couple-stress theory, elastohydrodynamic lubrication (EHL) contact is analyzed with a consideration of size effect. The lubricant between surface homogeneous coated half-plane and rigid punch supposed to be non-Newtonian fluid. density viscosity are dependent fluid pressure. Distributions film thickness, in-plane stress, pressure calculated by solving nonlinear fluid-solid...

Nanostructured alumina thin films were coated on stainless steel by Sol-Gel dip coating method. In order to prevent crack formation, Al2O3 films were kept in a solvent bath immediately after coating to reduce the rate of drying. Effects of calcination temperature and withdrawal speed on structural properties were analyzed using XRD and SEM. Topography and thickness of coat...

Hydrodynamic performance of a marine vessel mainly depends on the frictional and pressure resistance. Pressure drag reduction could be achieved by improving the shape of the vessels with implementation of modern hull forms. Hull forms optimization techniques could also be used for this purpose. Other techniques are needed to deal with the viscous portion of the total resistance, which is mainly...

a plain strain analysis of frictional rolling contact on an elastic graded coating is presented in this paper. finite element method is applied to gain an understanding of the stresses and contact zone properties caused during rolling contact. the effects of friction, material stiffness ratio and coating thickness on stresses in contact zone and coating/substrate interface are studied. shear mo...

The fundamentally changing nature of fracture in brittle coatings on compliant substrates with diminishing coating thickness is examined. Attention is focused on cracking induced by concentrated loading with a spherical indenter at the top surface. It is shown that the fracture mode undergoes transitions, from top-surface ring cracking around the contact (“thick-coating” region) to bottom-surfa...

Thermal fluctuations in the coatings used to make high reflectors are becoming significant noise sources in precision optical measurements and are particularly relevant to advanced gravitational-wave detectors. There are two recognized sources of coating thermal noise; mechanical loss and thermal dissipation. Thermal dissipation causes thermal fluctuations in the coating which produce noise via...

The application of a few basic principles, some empirical data, and experience is applied to estimate the average residual reflection expected in an AR coating as a function of bandwidth, wavelength, overall thickness, substrate index, available coating materials, and number of layers. This can be a useful tool for not only the thin film designer but also the non-designer or system engineer to ...