PURPOSE The purpose of this study is to compare the stress and stability of plate-screw fixation and screw fixation in the treatment of Schatzker type IV medial tibial plateau fracture. METHODS A three-dimensional (3D) finite element model of the medial tibial plateau fracture (Schatzker type IV fracture) was created. An axial force of 2500 N with a distribution of 60% to the medial compartme...

Abstract Composite filaments are getting increased attention in additive manufacturing (AM). More and better solutions for filament production needed to assist researchers discovering new materials capable of producing AM-made high-performance parts. This article presents a method composite filament, including an open-source, low-cost automatic feeder designed increase the accuracy quality fila...

A preliminary study of Acoustic Emission during orthopaedic screw fixation was performed using polyurethane foam as the bone-simulating material. Three sets of screws, a Dynamic Hip Screw, a small fragment screw and a large fragment screw were investigated, monitoring acoustic emission activity during the screw tightening. Some specimens were overtightened on purpose to investigate the possibil...

OBJECTIVE To investigate the feasibility of C1 lateral mass screw and C2 pedicle screw with polyaxial screw and rod system supplemented with miniplate for interlaminar fusion to treat various atlantoaxial instabilities. METHODS After posterior atlantoaxial fixation with lateral mass screw in the atlas and pedicle screw in the axis, we used 2 miniplates to fixate interlaminar iliac bone graft ...

Several authors have reported complications from screw removal after treatment of slipped upper femoral epiphysis by single screw fixation, and have attributed these to poor screw design. We have developed a simple and reliable method of screw removal which uses a cannulated 8.0 mm end-threaded cancellous screw (Smith & Nephew Richards Medical, Memphis, Tennessee) and a specially designed cannu...

OBJECTIVES Secondary fracture healing is strongly influenced by the stiffness of the bone-fixator system. Biomechanical tests are extensively used to investigate stiffness and strength of fixation devices. The stiffness values reported in the literature for locked plating, however, vary by three orders of magnitude. The aim of this study was to examine the influence that the method of restraint...

BACKGROUND The sustentacular screw is essential to maintain the stability of the subtalar joint during ORIF (open reduction with internal fixation) of calcaneal fractures. Currently, the screw is still inserted based on surgeons' anatomical experiences and nearly 40% of screws are misplaced from the sustentaculum. Previous studies demonstrated some methods of sustentacular screw placement throu...

OBJECTIVE Pedicle screw fixation for spine arthrodesis is a useful procedure for the treatment of spinal disorders. However, instrument failure often occurs, and pedicle screw loosening is the initial step of a range of complications. The authors recently used a modified transpedicular polymethylmethacrylate (PMMA) screw augmentation technique to overcome pedicle screw loosening. Here, they rep...

Biodiesel is obtained by processing edible and non-edible oils. Due to the increase in demand for fuel and stringent emission norms, biodiesel is preferred as it meets the emission norms. To meet the exponentially growing demands in developing countries, continuous production is required which can be achieved by mechanical screw presses. Currently, single screw press is being widely used for ex...

UNLABELLED To evaluate the presence of pain at the site of the surgical incision and the need to remove the tibial fixation screw in anterior cruciate ligament (ACL) reconstruction, in relation to sex and body mass index (BMI). METHODS A group of 265 patients who underwent ACL reconstruction with ipsilateral flexor tendon grafts from the thigh in which the tibial fixation technique consisted ...