Discrete element modeling is being used increasingly to simulate flow in fluidized beds. These models require complex measurement techniques to provide validation for the approximations inherent in the model. This paper introduces the idea of modeling the experiment to ensure that the validation is accurate. Specifically, a 3D, cylindrical gas-fluidized bed was simulated using a discrete elemen...

The main aim of the Computational Fluid Dynamics (CFD) simulations is to reconstruct the reality of fluid motion and behaviour as accurately as possible in order to better understand the natural phenomena under specified conditions. Ideally, general solutions can also cover different scales and geometric configurations. Unfortunately, due to expensive algorithms, classic CFD codes most often re...

a brass vortex tube (vt) with interchangeable parts is used to determine the optimum cold end orifice diameter, main tube length and diameter. experiments were carried out to study the effects of operating pressure as well. it is shown that there is an optimum value for cold end orifice diameter, which is equal to 4mm and there is an optimum value for cold and hot exit temperature difference at...

Computational Fluid Dynamics (CFD) and Discrete Element Modelling (DEM) studies relevant to inhaled drug delivery are reviewed. CFD is widely used in device design to determine airflow patterns and turbulence levels. CFD is also used to simulate particles and droplets, which are subjected to various forces, turbulence and wall interactions. These studies can now be performed routinely because o...

Computational Fluid Dynamics (CFD) simulations provide a variety of data mining challenges and present an opportunity for novel solutions. A core challenge is that CFD computations can require weeks of computation on expensive high performance clusters, delaying investigation of results until a fully converged solution is obtained. 21st Century Systems, Inc. and Brigham Young University have be...

In the early development of gas turbines, many empirical design rules were used; for example in obtaining fluid deflection using the deviation from blading angles, in the assumption of zero radial velocities (so-called radial equilibrium) and in expressions for clearance loss (the Lakshminarayana formulas). The validity of some of these rules, and the basic fluid mechanics behind them, is exami...

Spacers are used in spiral wound and plate and frame membrane modules to create flow channels between adjacent membrane layers and mix fluid within the flow channel. Flow through the spacer has a significant beneficial impact on mixing and resulting mass transfer rates but is accompanied by an undesirable increase in pressure drop. Computational Fluid Dynamics (CFD) is a common tool used to eva...