The presented macroscopic FE-model allows to analyze the thermal fields and the resulting stress built up during Selective Laser Sintering. Process and material parameters are focused on Direct Metal Laser Sintering (DMLS). The FE-model is introduced and the assumptions for the model are given. Three different geometric models are discussed. The 3Dmodel shows the sintering of a single line, whe...

Sintering is a complex industrial process that applies heat to fine particles of iron ore and other materials to produce sinter, a solidified porous material used in blast furnaces. The sintering process needs to be carefully adjusted, so that the combustion zone reaches the bottom of the material just before the discharge end. This is known as the burn-through point. Many different parameters ...

The Si-coated SiC (Si-SiC) composite nanoparticle was prepared by non-transferred arc thermal plasma processing of solid-state synthesized SiC powder and was used as a sintering additive for SiC ceramic formation. Sintered SiC pellet was prepared by spark plasma sintering (SPS) process, and the effect of nano-sized Si-SiC composite particles on the sintering behavior of micron-sized SiC powder ...

This study investigated the contrast ratio and grain size depending on sintering parameters of twelve different zirconia materials and compared with glass-ceramic (N=156, n=12 per group). Contrast ratio of all ceramics was measured using a spectrophotometer according to ISO 2471: 2008. Grain sizes of zirconia were determined by SEM. Data was analyzed using one-way ANOVA followed by post-hoc Sch...

This study was conducted to assess and compare the crack-healing ability of conventional electrical sintered microwave Al2O3/x wt. % SiC (x = 5, 10, 15, 20) structural ceramic composites. The both specimens studied by introducing a crack ?100 µm length Vickers’s indentation conducting heat treatment at 1200°C for dwell time 1 h in air. flexural or bending strength sintered, cracked, crack-heale...

PURPOSE The purpose of this study was to compare the linear sintering behavior of presintered zirconia blocks of various densities. The mechanical properties of the resulting sintered zirconia blocks were then analyzed. MATERIALS AND METHODS Three experimental groups of dental zirconia blocks, with a different presintering density each, were designed in the present study. Kavo Everest® ZS bla...

Calcium barium sulphoaluminate (CBSA), derived from calcium sulphoaluminate (CSA), has excellent cementitious properties. In this study, the sintering system of CBSA with a theoretical stoichiometric Ca3BaAl6SO16 was investigated. Rietveld refinement was performed using TOPAS 4.2 software to quantitatively calculate the content of CBSA and the actual ionic site occupancy of Ba2+. The results in...

Two-step sintering has been used to investigate the structure evolution and properties of the biogenic HA/glass composite containing 50 wt.% Na2O-B2O3-SiO2-based glass. The borosilicate glass facilitated the sintering process due to the viscous glass flow and stabilized the HA phase against thermal decomposition. It has been established that the structure significantly changes, becoming more ho...