The objective of the work reported is to study the effect of wavelength and the material removal mechanisms of a laser process for removing copper oxide from copper. The removal of copper oxide is necessary in electronics device fabrication in order to improve the surface wetability and so achieve a good quality solder joint. Such a laser cleaning process could be incorporated into an existing ...

The method of fabricating metallic nanowires from directionally solidified eutectics was applied to the silver–copper system. The silver–copper lloy, 39.9 at.% copper, was directionally solidified in a Bridgman-type oven held at 850 ◦C. SEM imaging revealed a mixed fibrous and lamellar icrostructure. The fastest solidification rates produced fibres and lamellae with widths as small as 300 nm. E...

New Fe-based bulk glassy alloys were synthesized in the (Fe0.75B0.15Si0.10)100−x Nbx system by copper mould casting. The maximum diameter of the bulk glassy alloy rod was 0.5 mm at 1 at%Nb, 1.0 mm at 2 at%Nb and 1.5 mm at 4 at%Nb. No glass transition is observed at 0 at%Nb, but the addition of Nb causes the appearance of glass transition before crystallization. The glass transition temperature ...

The selection of candidate materials for the accelerating cavities of the Compact Linear Collider (CLIC) is carried out in parallel with high power RF testing. The maximum DC breakdown field of copper, copper alloys, refractory metals, aluminium and titanium have been measured with a dedicated setup. Higher maximum fields are obtained for refractory metals and for titanium, which exhibits, howe...

This paper reviews the advantages of substituting die-cast copper for aluminum in the motor rotor. This advance in motor technology has been long sought by the motor industry but short die life due to the high melting point of copper frustrated attempts to manufacture by pressure die casting. The nickel-base alloy hot die technology developed to solve the manufacturing problem is briefly review...

Abstract In this paper, the pressing and sintering properties of three kinds copper-coated chromium composite powder copper-chromium mechanical mixed with same copper content were compared studied. The was prepared by a diffusion method, liquid electroless plating method an added binder. results show that increase in content, advantage copper-clad is more obvious. density, hardness, size shrink...