OBJECTIVES Microbial leakage through the implant-abutment (I-A) interface results in bacterial colonization in two-piece implants. The aim of this study was to compare microleakage rates in three types of Replace abutments namely Snappy, GoldAdapt, and customized ceramic using radiotracing. MATERIALS AND METHODS Three groups, one for each abutment type, of five implants and one positive and o...

Cyclic loading–induced deformation of soil is a common problem in engineering practice. In current practice, however, monotonic triaxial tests are more commonly used due to the availability apparatus and ease operation. Thus, it would be very useful practical if could evaluate behavior under cyclic loading. This study aims find an explicit relationship between saturated soft clay. Six nine comp...

A complete database of the mechanical properties of an epoxy polymer reinforced with uni-weave carbon fibre non-crimp fabric (NCF) is established. In-plane and through-the-thickness tests were performed on unidirectional laminates under normal loading and shear loading. The response under cyclic shear loading was also measured. The material has been characterised in terms of stiffness, strength...

To improve the durability of lead free solder joints under high strain rates, such as drop and shock loading, some area array manufacturers have converted to low silver (Ag) content tin silver copper (SAC) solder spheres instead of the commonly accepted SAC305 solder. While the lower silver content SAC solder joints may address high strain rate shock loads, the durability of these joints under ...

Cranial sutures are unique to skull bones and consist of multiple connective tissue cell lineages such as mesenchymal cells, fibroblast-like cells, and osteogenic cells, in addition to osteoclasts. Mechanical modulation of intramembranous bone growth in the craniofacial suture is not well understood, especially during postnatal development. This study investigated whether in vivo mechanical for...

The Direct Simple Shear (DSS) test is one of the laboratory element testing devices that has been widely used to assess soil behavior. Although the DSS test is considered to simulate the cyclic shear loading mode from the earthquakes in an effective manner, the most commonly used versions of the test device (such as the NGI-type DSS device) do not provide means of measuring the lateral stresses...

Abstract: Reduced Beam Section (RBS) and Drilled Beam Section (DBS) are seismic moment resistant frame connections, introduced after 1994 Northridge earthquake. RBS connection has been tested under cyclic loading and showed acceptable performance. In this paper, seismic behavior of Drilled Beam Section (DBS) connection is studied numerically using finite element method. A drilled beam section ...

BACKGROUND Cumulative trauma disorder is commonly reported by workers engaged in prolonged repetitive/cyclic occupational activities. Recent experimental evidence confirms that relatively short periods of cyclic lumbar flexion at high loads result in substantial creep of viscoelastic tissues, prolonged periods of its recovery to baseline together with a neuromuscular disorder and exposure to in...

BACKGROUND We compared different plates in an experimental calcaneal fracture model under biocompatible loading. METHODS Four plates were tested: a plate without locked screws (Synthes), and three different plates with locked screws (Newdeal, Darco, Synthes). Synthetic calcanei (Sawbone) were osteotomized to create a fracture model, and the plates were fixed onto them. Seven specimens for eac...

The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...