In this paper, a novel suspended stripline IF block is proposed for the design of millimeter-wave finline balanced mixer which covers the full U-band. In high IF frequency applications, IF block of a finline mixer is needed to act as open terminal for IF signal, and is required to have minimum attenuation for LO signal. For the purpose of reducing the insertion loss of the IF block in the LO pa...

The low concentration and complex sample matrix of many clinical and environmental viral samples presents a significant challenge in the development of low cost, point-of-care viral assays. To address this problem, we investigated the use of a microfluidic passive magnetic separator combined with on-chip mixer to both purify and concentrate whole-particle human immunodeficiency virus type 1 (HI...

This paper demonstrates a small compact 5.7 GHz upconversion Gilbert micromixer using 0.35 m SiGe HBT technology. A micromixer has a broadband matched single-ended input port. A passive LC current combiner is used to convert micromixer differential output into a singleended output and doubles the output current for singleended-input and single-ended-output applications. Thus, a truly balanced o...

With the increasing need for molecular reactions with small liquid volume in biomedical and chemical analyses, miniature mixers have captured considerable attention. Due to the nature of laminar flow in a millimeter-size and blow flow channel, mixing, or the molecular mass transfer in miniature mixers is usually dominated by molecular diffusion. The long diffusion time and mixing distance make ...

Spurious-free dynamic range (SFDR) is a key specification of radio receivers and spectrum analyzers, characterizing the maximum distance between signal and noise+distortion. SFDR is limited by the linearity (intercept point IIP3 mostly, sometimes IIP2) and the noise floor. As receivers already have low noise figure (NF) there is more room for improving the SFDR by increasing the linearity. As t...

By using interdigital microfluidic reactors, monodisperse poly(d,l lactic-co-glycolic acid) nanoparticles (NPs) can be produced in a continuous manner and at a large scale (~10 g/h). An optimized synthesis protocol was obtained by selecting the appropriated passive mixer and fluid flow conditions to produce monodisperse NPs. A reduced NP polydispersity was obtained when using the microfluidic p...

With the increasing need for molecular reactions with small liquid volume in biomedical and chemical analyses, miniature mixers have captured considerable attention. Due to the nature of laminar flow in a millimeter-size and blow flow channel, mixing, or the molecular mass transfer in miniature mixers is usually dominated by molecular diffusion. The long diffusion time and mixing distance make ...

We present the design and first experimental results of a 385-500 GHz fixed-tuned double sideband (DSB) receiver based on a superconductor-insulator-superconductor (SIS) junction mixer with on-chip LO injection circuitry. At high frequency, branch waveguide couplers are difficult to manufacture with required accuracy as the branches (slots) become extremely narrow. In order to solve this proble...

This paper proposes a new "twisted" 3D microfluidic mixer fabricated by a laser writing/microfabrication technique. Effective and efficient mixing using the twisted micromixers can be obtained by combining two general chaotic mixing mechanisms: splitting/recombining and chaotic advection. The lamination of mixer units provides the splitting and recombination mechanism when the quadrant of circl...