The aim of this study was to develop a user-friendly model for spray drying that can aid in the development of a pharmaceutical product, by shifting from a trial-and-error towards a quality-by-design approach. To achieve this, a spray dryer model was developed in commercial and open source spreadsheet software. The output of the model was first fitted to the experimental output of a Büchi B-290...

Soil nitrogen is one of the crucial components for plant growth. An accurate diagnosis based on soil nitrogen information is the premise of scientific fertilization in precision agriculture. Soil nitrogen content acquisition based on near-infrared (NIR) spectroscopy shows the significant advantages of high accuracy, real-time analysis, and convenience. However, soil texture, soil moisture conte...

the objective of this study was to investigate dehydration kinetics of barberry (berberis vulgaris l.) at different drying temperatures (60 ºc, 70 ºc, 80 ºc), air velocities (0.3 m s-1, 0.5 m s-1, 1 m s-1) with two types of pretreatment. drying time and colour quality during dehydration were experimentally determined. barberries were dried from the initial moisture content of 73.44% (w.b.) to t...

Global warming is expected to increase the frequency and intensity of droughts in the twenty-first century, but the relative contributions from changes in moisture supply (precipitation) versus evaporative demand (potential evapotranspiration; PET) have not been comprehensively assessed. Using output from a suite of general circulation model (GCM) simulations from phase 5 of the Coupled Model I...

in this study thin layer drying of corn in a convective dryer was investigated at air temperatures of 50, 60 and 70ºc and air flow rates of 1, 1.4 and 1.8 kg min-1. experiments were performed in completely randomized design (crd). the effect of air temperature and flow rate on drying time, drying rate, effective diffusivity coefficient and activation energy were studied. results showed that the...

We propose a model for the formation of drying cracks in a viscoplastic material. In this model, we observe that when an external force is applied to a viscoplastic material before drying, the material memorizes the effect of the force as a plastic deformation. The formation of the drying cracks is influenced by this plastic deformation. This outcome clarifies the result of recent experiments w...

This paper deals with the freeze-drying process and, in particular, with the optimization of the operating conditions of the primary drying stage. When designing a freeze-drying cycle, process control aims at obtaining the values of the operating conditions (temperature of the heating fluid and pressure in the drying chamber) resulting in a product temperature lower than the limit value of the ...

Modelling solar drying rate of waste-water sludge Ido Seginer* and Markus Bux 1 Civil and Environmental Engineering, Technion, Haifa, Israel 2 Agricultural Engineering, University of Hohenheim, Germany *Corresponding author. Fax: 972 4 829 5696; E-mail: [email protected] Efficient solar drying requires that the drying rate is quantitatively known as a function of the environment and th...

A study was conducted to find out the optimum tray load and drier type for the drying of osmosed mango, guava slices and aonla segments. The osmosed slices and segments were dehydrated in a cabinet drier, low temperature drier and vacuum drier with the tray loads of 0.30, 0.35, 0.40 and 0.45 g/cm. On the basis of, correlation and regression analyses performed by using dehydration time (h), drie...