This study aimed to develop a device to facilitate grinding experiments with microvibration for analyzing the vibration effect on surface finish of ground surfaces. A microvibration device was designed and fabricated. It can be used to provide microvibration to the workpiece vertically and/or horizontally during grinding. The relationship of the driving voltage, vibration displacement, and freq...

PURPOSE This study was to evaluate the effect of grinding of the inner metal surface during the porcelain try-in stage on metal-porcelain bonding considering the maximum temperature and the vibration of samples. MATERIALS AND METHODS Ninety-one square prism-shaped (1 × 1 × 1.5 mm) nickel-chrome cast frameworks 0.3 mm thick were prepared. Porcelain was applied on two opposite outer axial surfa...

Ductile fracture modeling still has to be improved at the macro and microscales. New numerical methods are applied to the limit analysis of cells containing one or several voids or void clusters. The results are compared with existing macroscopic models. Voids can also be introduced in analytical polycrystalline models, in order to combine plastic anisotropy and texture evolution with ductile f...

Advanced ceramics and semiconductors (i.e. SiC, Si, Quartz, etc.) are increasingly being used for industrial applications. These ceramics/semiconductors are hard, strong, inert, and light weight. This combination of properties makes them ideal candidates for tribological, semiconductor, MEMS and optoelectronic applications. Manufacturing these materials without causing surface and subsurface da...

OBJECTIVE Lock and key factory workers are under the risk of metal pneumoconiosis and occupational asthma. In this cross-sectional study, it's aimed to evaluate the relationship between metal dust exposure and respiratory symptoms, pulmonary function tests of workers in different section of lock and key factory. METHODS 54 male workers (mean age, 32.8 ± 5.4) in a security and safety products ...

Objectives: This study was conducted to evaluate the effect of grinding and sandblasting on the microstructure, biaxial flexural strength and reliability of two yttria stabilized tetragonal zirconia (Y-TZP) ceramics. Methods: Two Y-TZP powders were used to produce fine grained and coarse grained microstructures. Sixty discs from each material were randomly divided into six groups of ten. For ea...

OBJECTIVES The task of grinding sandstone with a 5-inch angle grinder is a major source of exposure to respirable crystalline silica (RCS), known to cause diseases such as silicosis and lung cancer among workers who work with these materials. A shroud may be a suitable engineering control for this task. The objectives of this study were to evaluate the effectiveness of four commercially availab...

Determination of the energy consumption in the processing of local alcoholic beverage, burukutu in selected commercially viable six (6) local government areas in Benue state of Nigeria was conducted. Eighteen cases were randomly investigated within these locations. Mathematical expression was developed to evaluate the energy requirement for each of the seven (7) readily defined unit operations,...

in this study; utilizing the elastic matrix ball has higher processing efficiency and better superficial quality than traditionalgrinding. the diversity of elastic abrasive tool characteristics contact with bend surface results in irregular wear abrasion，and abrasive tool machining status gets complicated. there is no theoretical interpretation of parameters affecting the grinding accuracy. bec...

PURPOSE Grinding with less stress on 3Y-TZP through proper selection of methods and instruments can lead to a long-term success of prosthesis. The purpose of this study was to compare the phase transformation and physical properties after zirconia surface grinding with 3 different grinding burs. MATERIALS AND METHODS Forty disc-shaped zirconia specimens were fabricated. Each Ten specimens wer...