Due to its popularity and high crack sensitivity, 6061 aluminum alloy was selected as a test material for the newly developed double-sided arc welding (DSAW) process. The microstructure, crack sensitivity, and porosity of DSAW weldments were studied systematically. The percentage of fine equiaxed grains in the fully penetrated welds is greatly increased. Residual stresses are reduced. Porosity ...

Porous electrodes instead of flat electrodes are widely used in electrochemical systems to boost storage capacities for ions and electrons, to improve the transport of mass and charge, and to enhance reaction rates. Existing porous electrode theories make a number of simplifying assumptions: (i) The charge-transfer rate is assumed to depend only on the local electrostatic potential difference b...

The residual porosity is an unavoidable phenomenon of the components produced by powder metallurgy process which in turn largely affects the strength property of the same. Now a day it is possible to control porosity of powder metallurgy components and retain them to desired amount when required. The porosity of a powder metallurgy component is greatly depends on the sintering temperature. In t...

The main aim of this survey paper is to give basic information about properties and applications of σ-porous sets in Banach spaces (and some other infinite-dimensional spaces). This paper can be considered a partial continuation of the author’s 1987 survey on porosity and σ-porosity and therefore only some results, remarks, and references (important for infinite-dimensional spaces) are repeated...

When charging or discharging a lithium-ion-battery (LIB), lithiation delithiation of the electrodes takes place. Especially in case anode active materials, often leads to significant volume increase. The latter can cause rearrangement particles. Although volumetric changes state-of-the-art cathode materials have been found be smaller than for anodes, they remain relevant. combined anodes and ca...

The effects of a porous fence with a nonuniform porosity on flow fields are investigated numerically. First, an experiment with a non-uniform porous fence located in a wind tunnel is performed to obtain a reference data set. Then, a numerical model that utilizes the finite volume schemewith a weakly compressible-flowmethod to solve the continuity and momentum equations is developed. The numeric...

Since the introduction to market by Sony in the early 1990s,[1] lithium-ion batteries (LIBs) have become dominate power sources for consumer electronics and have been recognized as a critical enabling technology to make electric vehicles (EVs)/ hybrid electric vehicles (HEVs) a success.[2] They are also being used to store carbon-free and renewable energy sources, such as solar, wind, and ocean...

To unravel how the microstructure affects the fracture surface roughness in heterogeneous brittle solids like rocks or ceramics, we characterized the roughness statistics of postmortem fracture surfaces in homemade materials of adjustable microstructure length scale and porosity, obtained by sintering monodisperse polystyrene beads. Beyond the characteristic size of disorder, the roughness prof...

Monolithic aerogels of high molecular weight polyethylene (Mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. These low density and highly porous aerogels present an apparent porosity up to 90%. The aerogel morphology observed by scanning electron microscopy (SEM) is characterized by spherulitic stru...

monolithic aerogels of high molecular weight polyethylene (mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. these low density and highly porous aerogels present an apparent porosity up to 90%. the aerogel morphology observed by scanning electron microscopy (sem) is characterized by spherulitic stru...