High Voltage Direct Current (HVDC) circuit breakers have to suppress high values of currents at high voltages in absence of current-zero points. This makes the arc interruption more severe than the case of conventional AC networks. For circuit breaking in HVDC networks, a capacitor-inductor set has been inserted in parallel with the circuit breaker to inject reverse current to the interruption ...

V. Marušić, I. Samardžić, I. Opačak. Faculty of Mechanical Engineering in Slavonski Brod University of Osijek, Croatia. The research investigated properties of aluminum bronze welded to structural steel St 52-3 N. Surface material CuAl-A3 was welded in one and two layers. There were dimension, metallographic examination of structures and hardness measured before and after heat treatment and aft...

Currently there is a huge competition amongst the OEMs and manufacturers in the auto industry to reduce the weight of the car. A few design modifications or use of different size and grades of materials solves this problem greatly. This paper focuses upon the metal finishing process of Laser Welded Blanks (LWB) with simulation and reliability as well as new process development. These blanks are...

Welding involves a metallurgical union process that relies on base metal fusion, i.e. the constituent metal of the structure, with or without filler metal, to form the soldered joint. Thus, a definition of welding proposed by the AWS is an "operation which aims to get localized coalescence produced by heating to a suitable temperature, with or without applying pressure and filler metal, produci...

The problems of distortion, residual stresses and reduced strength of structure in and around a welded joint are of major concern in the shipbuilding industry and in other similar manufacturing industries. The present paper deals with the theoretical analysis of transverse shrinkage in a welded butt joint. The mathematical model used in this analysis is based on the assumption that the plate un...

This paper deals with an experimental investigation on the friction stir welding of pure copper. 4 mm thick copper plates have been welded in the butt joint configuration using a conical unthreaded tool, with and without preheating. An electrically heated backing plate has been employed to increase the initial temperature of the plates and to investigate the influence of pre-heating on the weld...

The fatigue strength assessment of welded joints by using the known parent material fatigue strength is considered in this paper. The stress concentration factor was determined performing FEA of singlesided transverse attachment joints for mean value of weld toe radius which was calculated by using several measurements of the weld toe radius along the weld length. The fatigue strength of welded...

A crack detection (CD) paint was applied to weld lines of a transverse rib welded joint specimen of a rolled steel for welded structures, and the effects of the paint on visual detection of fatigue cracks were evaluated by performing a fatigue test. Remarkable color development was observed in the CD paint when fatigue cracks propagated along the weld toe lines. At intervals in the fatigue test...