A nonlinear coefficient of 3.6-4.1  W-1  km-1 and group velocity dispersion of -20  ps2/km of a commercial core-pumped thulium-doped fiber have been evaluated using degenerate four-wave mixing at 2 μm. The anomalous dispersion behavior of the fiber has been confirmed by linear measurements with an all-fiber Mach-Zehnder interferometer (MZI). Additionally, no pum...

We present an ultra-short distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber. The entire laser is only 8.4 mm in length. The lasing threshold is less than 1 mW. The optical signal-to-noise ratio of the laser output is better than 70 dB. The laser emits two orthogonal polarization modes and generates a beat signal with signal-to-noise ratio of approximately 70 dB and 3-dB li...

Saturated absorption spectroscopy reveals the narrowest features so far in molecular gas-filled hollow-core photonic crystal fiber. The 48-68 mum core diameter of the kagome-structured fiber used here allows for 8 MHz full-width half-maximum sub-Doppler features, and its wavelength-insensitive transmission is suitable for high-accuracy frequency measurements. A fiber laser is locked to the (12)...

purpose : this study was designed to assess and compare the thickness of the peripapillar retinal nerve fiber layer (rnfl) in amblyopic and normal eyes in unilateral strabismic ambelyopia using scanning laser polarimeter. methods : scanning laser polarimetry was performed on 17 patients with unilateral strabismic amblyopia who had an absence of neurologic diseases or glaucoma with a minimum age...

We report on a Tm:fiber master oscillator power amplifier (MOPA) system producing 109 W CW output power, with >15 dB polarization extinction ratio, sub-nm spectral linewidth, and M2 <1.25. The system consists of polarization maintaining (PM) fiber and PM-fiber components including tapered fiber bundle pump combiners, a single-mode to large mode area mode field adapter, and a fiber-coupled isola...

A microstructured polymer optical fiber doped with Rhodamine 6G dye was fabricated and demonstrated as an optical amplifier and a fiber laser. As an amplifier, the fiber achieved a gain in excess of 30 dB. As a pulsed fiber laser, the fiber exhibited a threshold of 20 microJ, a slope efficiency of 18%, and a lifetime as high as 130,000 shots at 10 Hz. The maximum output energy was 16 microJ. Th...

In this paper, a double-clad Er/Yb fiber laser with self-Q-switched and continuous wave operation depending on the pump power range is experimentally demonstrated. The linear cavity is formed on one side by a pair of cascaded tunable fiber Bragg gratings used for the selection and tuning of the generated laser lines. On the opposite side, a fiber optical loop mirror with high birefringence fibe...

We report on a novel scheme to fabricate a simple, cheap, and compact tunable fiber laser. The tuning is realized by splicing a piece of single-mode fiber to one end of an active double-clad fiber, while the other end of the single-mode fiber is spliced to a 15 mm long section of 105/125 multimode fiber. The fluorescence signal entering into the multimode fiber will be reproduced as single imag...

The humidity sensor made of polymer optical fiber Bragg grating (POFBG) responds to the water content change in fiber induced by the change of environmental condition. The response time strongly depends on fiber size as the water change is a diffusion process. The ultrashort laser pulses have been providing an effective microfabrication method to achieve spatial localized modification in materi...

Using the formalism of mode overlap, a theoretical analysis of optically pumped fiber laser amplifiers and oscillators is developed. The concept of normalized overlap coefficients is introduced to account for the effects of the transverse structure of the interacting signal and pump modes on the device characteristics. Simple and accurate closed-form expressions are derived for the gain of fibe...