Downlink transmit diversity modes for WCDMA together with a two fixed-beam antenna array system are compared relative to the single antenna sectorized system in a radio network simulator. The transmit diversity methods investigated are: space time transmit diversity and closed loop mode I transmit diversity. Frequency selective (COST 259) and flat fading channels are considered and their impact...

This paper reports the design and fabrication of capacitive silicon nanomechanical resonators with the selective vibration of a high-order mode. Fixed-fixed beam capacitive silicon resonators have been successfully produced by the use of electron beam lithography, photolithography, deep reactive ion etching, and anodic bonding methods. All resonators with different vibration modes are designed ...

We show that, in order to attain complete polarization control across a beam, two spatially resolved variable retardations need to be introduced to the light beam. The orientation of the fast axes of the retarders must be linearly independent on the Poincaré sphere if a fixed starting polarization state is used, and one of the retardations requires a range of 2π. We also present an experimental...

In radiosurgery, a moving beam of radiation acts as an ablative surgical instrument. Conventional systems for radiosurgery use a cylindrical radiation beam of fixed cross section. The radiation source can be moved only along simple, standardized paths. A new radiosurgical system based on a six-degree-of-freedom robotic arm has been developed to overcome limitations of conventional systems. We a...

Based on the small deflection beam theory, bending equation with axial tension of suspended pipe partially buried in the linear elastic soil is established. And the corresponding boundary conditions are given according to the stress and deformation characteristics of suspended section and buried section. Then deflection equation for the suspended section is deduced. Afterwards, the stress and c...

The nonlinear pull-in behaviors of various electrostatic micro-actuators were simulated. The differential quadrature method (DQM) was applied to overcome the difficulty in solving the nonlinear equation of motion. Various types of micro-actuators, such as the cantilever beam actuator and the fixed-fixed beam actuator were derived and simulated to examine the feasibility of applying the DQM to t...

In this paper, we present the experimental results of a Digital Beam Forming (DBF) Synthetic Aperture Radar (SAR) performance on the purpose of the High-Resolution Wide-Swath (HRWS) SAR concept. A ground-based SAR system successfully demostrates the DBF SAR operation. The demostrator aquired SAR raw data with very dense spatial sampling rate in order to obtain various sampling rates. We evaluat...

A method is given by which the response of a rotating or non-rotating Timoshenko beam can be determined, subjected to an accelerating fixed direction distributed surface force. The beam mode1 includes the gyroscopically induced displacement transverse to the direction of the load. The solution for pinned supports is set up using multi-integral transforms, and the inversion is expressed in terms...

Precession electron diffraction has seen a fast increase in its adoption as a technique for solving crystallographic structures as well as an alternative to conventional selected-area and converged-beam diffraction methods. One of the key issues of precession is the pivot point alignment, as a stationary apparent beam does not guarantee a fixed pivot point. A large precession tilt angle, along ...