the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...

An experiment investigating the elastic local buckling response of trough girders composed of thin profiled steel sheeting has been undertaken Beam tests were performed to promote initial local buckling in a region of constant moment in the elastic range of structural response. The results of the experiments were compared with an elastic complex semi-analytical finite strip method of analysis, ...

This paper presents an analytical method to calculate the buckling stress of a rectangular thin plate under nonuniform applied axial stresses. Two cases are considered, buckling of a plate simply supported on all four sides and buckling of a plate simply supported on three sides with one unloaded edge free and the opposite unloaded edge rotationally restrained. These two cases illustrate the in...

Piezoelectric nanobeams having circular, rectangular and hexagonal cross-sections are synthesized and used in various Nano structures; however, piezoelectric nanobeams with hexagonal cross-sections have not been studied in detail. In particular, the physical mechanisms of the surface effect and the role of surface stress, surface elasticity and surface piezoelectricity have not been discussed t...

The mechanical behaviour and design of fixed-ended steel equal-leg angle section members subjected to axial compression are addressed in this study. First, the critical buckling is described. Experimental data on columns collected from literature then used for validation numerical (shell finite element) models, developed within commercial package ABAQUS. Validation performed by means comparison...

Analytical solutions for elastic buckling and post-buckling geometries are scarce. The present work presents such a solution sample geometry, initially planar, which buckles into complex 3D shape under tensile load. assumptions that the thickness is small, so flexural stiffness low compared to in-plane strain stiffness, hence can be considered inextensible. initial geometry composed of two disk...

The buckling of compression members may lead to the progressive collapse spatial structures. Based on sleeved member, monitoring member is introduced control and raise alert by sensing contact between core tube restraining tube. Considering rigid connection among in structures, with ends needs be further analyzed. An experimental test was conducted finite element analyses were performed calibra...

Magneto-electro-elastic materials are multiphase smart materials that exhibit coupling among electrical, magnetic and mechanical energy fields. Due to this ability, they have been the topic of numerous research in the past decade. In this paper, buckling behavior of a multiphase magneto-electro-elastic rectangular plate with simply supported boundary conditions is investigated, based on Reddy’s...

In this paper, simulation and analysis of thin steel cylindrical shells with elliptical cutouts under oblique loading were studied using finite element method. First, the numerical results were validated by the results of experimental test performed by an INSTRON 8802 servo hydraulic machine. Also, the effect of cutout angle (θ), cutout size, cutout position (L0/L) and cutout aspect ratios (b/a...

The presence of the delamination causes reductions in the bending stiffness which in turn leads to the undesirable loss in the compressive buckling and post-buckling strength. Thus, it is of chief importance to investigate the compressive behavior of composites with delaminations. Anastasiadis et al. analyzed the buckling and postbuckling behavior of delaminated composite laminates with a throu...