The delamination process in notched composite plates under flexural loading has been investigated using finite element analysis. Cohesive elements implemented in the commercial finite element package ABAQUS have been used in the region around the drilled-hole, and positioned between layers where delamination was observed during experiments presented in an accompanying paper. The delamination in...

Optimized topology of bi-material acoustic metamaterial lattice plates is studied for maximized locally resonant bandgap of flexural guided waves. Optimized layout of the two relatively stiff and compliant material phases in the design domain is explored, free from any restrictions on the topology and shape of the relevant domains. Multiobjective optimization is performed through which maximize...

Prediction and measurement of vibration power flow in structures are both important for locating vibration sources and sinks and for confirming vibration propagating paths. From the point of view of noise and vibration control in industries, the method is very important for practical reasons. Consequently, it is essential to address the state of the art of the method, its effectiveness and limi...

This study aims to investigate a new shear reinforcement method which utilizes thin mild steel (TMS) plates as in deep beams replace conventional reinforcement. Thirteen reinforced concrete beam specimens with three different plate thicknesses and four varying perforated hole arrangements on the TMS were experimentally tested determine load-carrying capacity crack pattern. The experimental resu...

PURPOSE A new light curing urethane dimethacrylate and a cold curing resin with simpler and faster laboratory procedures may have even improved flexural properties. This study investigated the 3-point flexural strengths and flexural moduli of two alternate base materials. MATERIALS AND METHODS A cold curing resin (Weropress) and a light curing urethane dimethacrylate base material (Eclipse). ...

The flexural strength and flexural modulus of an experimental metal-resin composite, which used Ag-In alloy particle as the filler, were evaluated. The effect of acid treatment and heat treatment on the Ag-In alloy particle was investigated. The flexural strength of the experimental metal-resin composites ranged from 65.5 MPa to 91.0 MPa. The flexural strength of the metal-resin composite incre...

In this work, we present the development and characterisation of new cement-based composite panels reinforced with fibres recovered from wastes protective technical clothing. The developed a flexural strength (?15 MPa) fracture toughness (?3.5 kJ/m 2 ) that are suitable for their application on ventilated façades. environmental impact these was evaluated through life-cycle assessment (LCA) crad...

Mortars containing carbon, polyethylene, and stainless steel fibers at the same volume fraction and with similar fiber diameters were compared in terms of tensile, compressive, and flexural properties. Carbon fibers, though having the lowest tensile modulus, stren[?th, and elongation at break among the fiber types, [?ave mortar of the highest tensile strenf?th and lowest cost; polyethylene fibe...

In moment resisting reinforced concrete framed buildings, corner joints are found at the roof level. These joints, if designed for gravity loads and are based on pre-seismic codes, may suffer substantial damage during earthquakes particularly under opening cycles, i.e. those causing flexural tension on the inside of the joint. Several techniques of repair and strengthening of reinforced concret...

The paper presents the development of a new plate/shell stiffener element and the subsequent application in determine frequencies, mode shapes and buckling loads of different stiffened panels. In structural modelling, the plate and the stiffener are treated as separate finite elements where the displacement compatibility transformation takes into account the torsion – flexural coupling in the s...