AIM Surface treatment is necessarily required for bonding of zirconia to the veneering porcelain and luting cements. Sandblasting is the most common and probably the most efficient surface treatment method. Sandblasting roughens the surface and may affect the flexural strength of zirconia. Different sandblasting protocols may yield variable results. This study sought to assess the effect of san...

Selective Laser Sintering (SLS) provides a way to fabricate graphite composite bipolar plates, which significantly reduces time and cost at the research and development stage of bipolar plates, as compared with the conventional fabrication methods of compression molding and injection molding. Different graphite materials (natural graphite, synthetic graphite, carbon black, and carbon fiber) wer...

The purpose of this study was to evaluate the flexural strength, flexural modulus, modulus of resilience, and water sorption of four flowable light-cured composite resins (FCRs). Results were then compared with four conventional composite resins (CCRs) and a minifilled hybrid light-cured composite resin, which served as a control. Twenty specimens were flexural tested immediately after curing, ...

this paper investigated the effects of combining fibers with self-consolidating concrete (scc). 12 series of test specimens were prepared using three kinds of fibers including steel, polyphenylene sulfide (pps) and glass fibers with four different volumes fractions and one specimen without fibers as a reference sample. all plans were subjected to fresh concrete tests. for mechanical behavior of...

in the present study, the effect of various weight fractions of graphene nanoplatelet (gpl) on flexural fatigue behavior of epoxy polymer has been investigated at room temperature and generally the temperature was monitored on the surface of specimen during each test. the flexural stiffness of grapheme nano-platelet/epoxy nanocomposites at 0.1, 0.25 and 0.5 wt. % as a main effective parameter o...

BACKGROUND Repeated fracture of the denture base is a common problem in prosthodontics, and it represents a nuisance and a time sink for the clinician. Therefore, the possibility of increasing repair strength using new reinforcement materials is of great interest to prosthodontists. AIM OF THE STUDY This study aimed to evaluate the effects of incorporation of zirconia nanoparticles (nano-ZrO2...

Based upon the statistical distribution of flexural fatigue life data and flexural fatigue strength of the steel fibre reinforced concrete (SFRC) containing blends of limestone powder (LP) and silica fume (SF), the influence of these inserts on the flexural fatigue performance of concretes is probed. Concrete mixes were proportioned to replace 30% cement with these mineral inserts in different ...

The purpose of this research was to experimentally characterize the flexural and tensile characteristics of fiber-reinforced Very High-Strength Concrete (VHSC) panels. The panels were made with a unique mix of cementitous materials achieving compressive strength of 26,000 psi (180 MPa) or greater. VHSC panels were reinforced with polypropylene fibers of 1 inch (25.4 mm) in length and Polyvinyl ...

i ntroduction: many of highly-alkaline dental materials have some adverse effects on physical properties of dentin. as basic substances, mineral trioxide aggregate (mta), calcium hydroxide (ch) and the new endodontic material, calcium-enriched mixture (cem) cement, may adversely affect dentin. the purpose of this in vitro study was to evaluate the effect of long-term application of cem cement, ...

The purpose of the present study was to test the hypothesis that glazing will affect the Weibull modulus or the mean flexural strength of dental porcelain. Four groups (n = 30) of specimens were prepared from feldspathic body porcelain (Vita VMK 68). The specimens were tested in groups: original glazed condition (control), and after grinding separately with 1,000-grit, 600-grit, and 100-grit si...