In this work, the techno-economic and exergy analyses of two gasification technologies with integration into heat power combined cycles are presented: i). Circulating fluidized bed (CFB) ii). Dual (DFB) systems. As feedstock, lignocellulosic biomass (sugarcane bagasse, SCB) was considered . The process fluidized-bed systems (circulating dual bed) syngas conversion were performed using Aspen Plu...

effect of scale on the hydrodynamics of gas-solid fluidized beds was investigated in two fluidized beds of 152 mm and 78 mm in diameter.  air at room temperature was used as the fluidizing gas in the bed of sand particles. the radioactive particle tracking (rpt) technique was employed to obtain the instantaneous positions of the particles at every 20 ms of the experiments. these data were used ...

Experiments were carried out to measure the additional pressure, called the granular pressure, which is exerted on the containing wail of a fluidized bed due to particle collisions with that wall. Measurements were made for water fluidized beds using glass beads of 1.3 mm and 3 mm diameter, lead shot of 2.1 mm diameter and plastic particles. The granular pressure was observed to increase to a m...

a solid – liquid – gas, multiphase reactor, called inverse fluidized bed bioreactor (ifbbr) was used in this study for the treatment of starch industry wastewater of high organic content and acidic nature. mixed culture obtained from the sludge, taken from starch industry effluent treatment plant, was used as microorganisms. experiments were carried out in an inverse fluidized bed bioreacto...

Ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. The solid particles obtained in this process of drying were semi-porous and known as the group D of Geldart classification. The variations of moisture content with resident time, the effects of bed height on the pressure dro...

The objective of this research was to evaluate several different pressure probe techniques used to measure the pressure fluctuations in a fluidized bed, to determine the effect of bed parameters on the power spectrums from the corresponding pressure fluctuations, and to develop a second-order model that describes the power spectrums of these pressure fluctuations. The motivation for this work i...

We report initial NMR studies of gas dynamics in a particle bed fluidized by laser-polarized xenon (129Xe) gas. We have made preliminary measurements of two important characteristics: gas exchange between the bubble and emulsion phases and the gas velocity distribution in the bed. We used T2* contrast to differentiate the bubble and emulsion phases by choosing solid particles with large magneti...

in this search drying characteristics of green pea (pisum satium) with an initial moisture content of 76% (db) was studied in a fluidized bed dryer assisted by microwave heating. four drying air temperatures (30, 40, 50 and 60ºc) and five microwave powers (180, 360, 540, 720 and 900w) were adopted. at each drying operating conditions the volume of green pea was calculated by measuring the three...