Membrane fouling problem is one of the most crucial issues which restricts the development of MBR and is, therefore, the prime research topic for many researchers worldwide. Anaerobic MBRs offer interesting perspectives as a potential solution for the treatment of wastewaters under extreme conditions, e.g. high temperature and/or high salt content, However, the research on membrane fouling of A...

Modified cellulose acetate (CA) membranes were prepared by dissolving the polymers in a mixture of acetone (AC) and N, N dimethylacetamide (DMAc) (70:30) solvent and deionized (DI) water was used in the coagulation bath. The introduction of polyethylene glycol (PEG) additive and TiO2 nanoparticles (NPs) into the casting solution has changed the structures of the resulting membranes during the p...

Fouling behaviour and its impact on the rejection of trace organic contaminants (TrOCs) by forward osmosis (FO) were investigated.Membrane fouling was simulated using humic acid and colloidal particles asmodel foulants at different initial permeatewater fluxes.Water flux declinewas insignificant at an initial permeate flux of 9 L/m2h and the fouling layerwas loose and fluid-like. By contrast, t...

As part of an environmental observation and forecasting system, sensors deployed in the Columbia RIver Estuary (CORIE) gather information on physical dynamics and changes in estuary habitat. Of these, salinity sensors are particularly susceptible to biofouling, which gradually degrades sensor response and corrupts critical data. Automatic fault detectors have the capability to identify bio-foul...

The mechanisms regarding the influence of dissolved organics in papermaking whitewater together with metal ions on the fouling of an ultrafiltration (UF) membrane were studied in this paper. A series of experiments were carried out to characterize the organic matters’ size and membrane flux. The associated fouling mechanism was investigated using the modified Hermia empirical model, resistance ...

Waterfalls commonly exist near bounding faults of mountain ranges, where erosional bedrock catchments transition to depositional alluvial fans. We hypothesize that aggradation on alluvial fans can bury active faults, and that the faults accumulate slip in the subsurface to produce a bedrock scarp. Following entrenchment of the alluvial fan, the scarp can be exposed as a waterfall. To explore th...

[1] Axial valleys are found along most slow-spreading mid-ocean ridges and are one of the most prominent topographic features on Earth. In this paper, we present the first deep-tow swath bathymetry for the axial valley walls of the Mid-Atlantic Ridge. These data allow us to analyze axial valley wall morphology with a very high resolution (0.5 to 1 m compared to ≥ 50 m for shipboard multibeam ba...

Faults in computer networks may result in millions of dollars in cost. Faults in a network need to be localized and repaired to keep the health of the network. Fault management systems are used to keep today’s complex networks running without significant cost, either by using active techniques or passive techniques. In this paper, we propose a novel approach based on imperialist competitive alg...

Membrane fouling limits the effects of long-term stable operation of membrane bioreactor (MBR). Control of membrane fouling can extend the membrane life and reduce water treatment cost effectively. A pilot scale anoxic/aerobic-membrane bioreactor (A/O-MBR, 40 L/hr) was used to treat the hyperhaline municipal sewage from a processing zone of Tianjin, China. Impact factors including mixed liquid ...

Two major types of passive margins are recognized, i.e. volcanic and non-volcanic, without proposing distinctive mechanisms for their formation. Volcanic passive margins are associated with the extrusion and intrusion of large volumes of magma, predominantly mafic, and represent distinctive features of Larges Igneous Provinces, in which regional fissural volcanism predates localized syn-magmati...