We present the results of compositional reservoir simulation of a prototypical CO2 sequestration project in a deep saline aquifer. The objective was to better understand and quantify estimates of the most important CO2 storage mechanisms under realistic physical conditions. Simulations of a few decades of CO2 injection followed by 10 to 10 years of natural gradient flow were done. The impact of...

Recent developments in hydraulic fracturing (fracking) have enabled the recovery of large quantities of natural gas and oil from old, low-permeability shales. These developments include a change from low-volume, high-viscosity fluid injection to high-volume, low-viscosity injection. The injected fluid introduces distributed damage that provides fracture permeability for the extraction of the ga...

Viscous flow, effusion, and thermal transpiration are the main gas transport modalities for a rarefied gas in a macro-porous medium. They have been well quantified only in the case of simple geometries. This paper develops a model based on the homogenization of kinetic equations producing effective transport properties (permeability, Knudsen diffusivity, thermal transpiration ratio) in any poro...

Abstract Identifying changes in coal permeability with gas pressure and accurately codifying mean effective stresses laboratory samples are crucial predicting gas-flow behavior reservoirs. Traditionally, to is assessed using the steady-state method, where equivalent indexed average of upstream downstream pressures coal, while ignoring nonlinear gradient along flow path. For a compressible gas, ...

According to the present situations that the construction amount of the gas drainage boreholes in mining seam is large and the gas drainage effect in low permeability coal seams doesn’t yield perfect, the hydraulic reaming technology in mining seam is proposed to increase the gas drainage efficiency. Through the gas flow method, the effective influence radius of hydraulic reaming is determined....

The ability of foam to control the gas mobility in porous media is determined in part by the trapped (stationary) fraction of foam, Xt. The common approach to determining Xt is to replace some part of the gas by a “tracer gas” during the steady-state stage of the experiments and fitting the effluent data to a capacitance mass-transfer model. Diffusion between bubbles is quantified by the film p...