During the last few years, natural fibers have received much more attention than ever before from the research community all over the world. These natural fibers offer a number of advantages over traditional synthetic fibers. The present study aims to determine the mechanical properties namely, Tensile strength (TS), Flexural strength (FS), and Impact strength (IS) of green coconut fiber reinfo...

When increasing the wood fiber (WF) content in extruded wood fiber/plastic composites (WPC) foams, a good balance between reducing the cost and obtaining good cell morphology should be maintained. This study examines the relationship between WF content and the foam morphology in WPC foams. The role of WF as cell nucleating agent at low concentrations (10 wt.%) was observed, as WPC foam with 10 ...

The potential of recycled waste polymeric materials as a substitute for aggregates in concrete has been investigated in the study. Two different types of waste polymer, namely polyurethane formaldehyde (PUF) based packaging waste and high density polyethylene (HDPE) were recycled and used in the experiment. Concrete and masonry poly block specimens were prepared using recycled polymer materials...

The effects of vacuum ultraviolet (VUV) treatment on surface chemical composition morphology and albumin adsorption for low-density polyethylene (LDPE) and high-density polyethylene (HDPE) were investigated. The attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectra and contact angle measurements indicated the formation of oxygen-containing polar groups and double bonds under...

This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF). The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE), acetone/water (AW), and hot water (HW), or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial weathering under accelerated c...

The influences of filler size and content on the properties (thermal conductivity, impact strength and tensile strength) of Al2O3/high density polyethylene (HDPE) composites are studied. Thermal conductivity and tensile strength of the composites increase with the decrease of particle size. The dependence of impact strength on the particle size is more complicated. The SEM micrographs of the fr...

The effects caused upon the physicochemical behavior of high-density polyethylene pipes by exposure to a diesel lubricant were investigated, as a function of time and temperature, by thermogravimetric and gravimetric analysis and by FTIR. The gravimetric data were satisfactorily described using Fick’s law. The fitting of the experimental points showed that diesel, which can be regarded as a mod...

The pyrolysis of waste newspaper (WP) and co-pyrolysis of waste newspaper with high-density polyethylene (HDPE) (1:1 wt%) were carried out in a quartz tube at 500 °C to obtain biochars. The biochars were characterized in detail by X-ray diffraction (XRD), thermogravimetric analysis (TG), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), elemental analysis,...

The aim of this study is evaluating the interaction between several base pen grade asphalt binders (35/50, 50/70, 70/100, 160/220) and two different recycled plastics (EVA and HDPE), for a set of new polymer modified binders produced with different amounts of both recycled plastics. After analysing the results obtained for the several polymer modified binders evaluated in this study, including ...