Corrosion is one of the major reasons for wear and tear of equipments. It is also responsible for reducing the life of equipments. Many accidents occur because of failure of pipelines due to corrosion. There are many methods to minimize corrosion. Cathodic protection, use of inhibitors, use of anticorrosive coatings is few methods used for this purpose. The presence of moisture in the atmospher...

an important issue in power generation and petrochemical industries is the monitoring of pipe wall thickness and corrosion/erosion rate. the pipes are usually subject to erosive and/or corrosive environments and any failure could be catastrophic. while periodic manual ultrasonic thickness measurement is the common practice in many industries, in certain cases, where higher accuracies are requir...

The chemistry behavior of steel electrode in acid solutions has been studied by galvano static polarization technique. The consequences of concentrations of acid and temperature of solution are examined. It was found that greater the citric acid concentration or reducing of temperature of the solution assist the passivation process. The values of icorr decreased with greater concentrations of c...

Alkaline cleaning agents are found to react with remnant manufacturing lubricants trapped in surface defects of a NiTi alloy to form Cl-based salts. These sub-surface “reservoirs” may act as nucleation sites for pitting corrosion either latent under ambient conditions, or on exposure to a limited range of high temperatures used to impart pseudoelastic properties in these alloys as part of norma...

aluminum alloys such as al 5083 have primary potential for lightweight structural application in automotive and aerospace industries. this paper addresses the mechanical and tribological properties and corrosion resistance of chromium nitride coatings deposited on al 5083 that can be used for development of applications of aluminum 5083 alloy. the crn coatings of 1 μm thickness were deposited b...

Corrosion is the process of degradation or failure of a material resulting from a chemical reaction between the material and its surrounding environment. It is an indispensible research area in material science and engineering, because corrosion resistance characterizes the stability or durability of a material, which is one of the most important material performances in application. Compared w...

The kinetics of mild steel corrosion in 20:0, 19:1, 18:2 and 15:5 (v/v%) aqueous mixture of acetic and formic acids has been investigated by weight loss and potentiostatic polarization techniques. The effects of composition of electrolyte and temperature on the corrosion rate of mild steel have been evaluated. The corrosion rate of mild steel increased linearly with temperature as well as amoun...