The Pebble Bed Advanced High Temperature Reactor (PB-AHTR) is a liquid-salt cooled reactor that uses conventional TRISO fuel. Due to the high thermal inertia of the liquid salt coolant, the PB-AHTR allows for a much higher power-density core than traditional gas-cooled high temperature reactors. High power density has a favorable economic impact. In 2007, the baseline design 2400MWth PB-AHTR wa...

The heat transfer analysis of hydrate-bearing sediment involved phase changes is one of the key requirements of gas hydrate exploitation techniques. In this paper, experiments were conducted to examine the heat transfer performance during hydrate formation and dissociation by a thermal method using a 5L volume reactor. This study simulated porous media by using glass beads of uniform size. Sixt...

A tubular pilot scale fixed-bed reactor for the Fischer–Tropsch Synthesis (FTS) was simulated to numerically demonstrate the conversion of synthesis gas (CO+H2) to higher hydrocarbons over an iron based catalyst. The reactor was a 3.1 cm diameter and 2.75 m length steel tube. The feed temperature were between 563583 K. Saturated water was employed to control the peak temperature within the cata...

due to the population growth and human activities in the agricultural and industrial fields, healthy and sanitary water has become scarce. due to its high contamination load, environmental harms and water discharge standards, starch producing industry is regarded as one of the industries polluting water sources which its treatment and recovery remains important. in the present study, after fabr...

This study investigated the performance and stability of an anaerobic baffled filter reactor in the treatment of algae-laden water from Taihu Lake at several organic loading rates. The study also evaluated the capability of soft filler to train granule sludge and improve the anaerobic environment and sludge activity in the anaerobic baffled reactor (ABR), thereby enhancing the treatment efficie...

The influence of reactor wall conditions on the characteristics of high density fluorocarbon plasma etch processes has been studied. Results obtained during the etching of oxide, nitride, and silicon in an inductively coupled plasma source fed with various feedgases, such as CHF3 , C3F6 , and C3F6/H2 , indicate that the reactor wall temperature is an important parameter in the etch process. Ade...

The performance of an upflow anaerobic sludge blanket (UASB) reactor and a hybrid UASB-filter reactor was investigated and compared for the treatment of domestic wastewater at different operational temperatures (28, 20, 14 and 10°C) and loading rates. For each temperature studied a constant CODt removal was observed as long as the upflow velocity was lower than 0.35 m/h. At these upflow velocit...

issues. These include the material employed in the reactor walls, the cladding material for the fissile nuclear fuel, and the material used for retaining the fission products. In addition to long term resistance to irradiation, the materials used in a nuclear reactor must have excellent mechanical and corrosion properties in order to tolerate the thermal shocks as well as the high temperature a...

Abstract—This study presents an inverse analysis for predicting the thermal conductivities and the heat flux of a high-temperature metallurgical reactor simultaneously. Once these thermal parameters are predicted, the time-varying thickness of the protective phasechange bank that covers the inside surface of the brick walls of a metallurgical reactor can be calculated. The enthalpy method is us...