The bijel is a new class of soft material comprised of two fluids arrested in a bicontinuous configuration on the mesoscale. We stabilize the fluid structure using an interfacial layer of silica particles. The particles become trapped at the liquid-liquid interface because they reduce the exposed area; this relies on the particles being partially wetted by both liquids. We use water and 2,6-lut...

We present a microfluidic device that enables high throughput production of relatively monodisperse emulsion drops while controlling the average size. The device consists of a two-dimensional array of regularly-spaced posts. Large drops of a highly polydisperse crude emulsion are input into the device and are successively split by the posts, ultimately yielding a finer emulsion consisting of sm...

crown ethers 12-crown-4 (12c4), benzo-15-crown-5 (b15c5), 18-crown-6 (18c6), nitrobenzo-18-crown-6 (nb18c6) dibenzo-18-crown-6 (db18c6) and dicyclohexyl-18-crown-6 (dc18c6), dissolved in dichloromethane, are able to form oxonium-ion complexes in contact with aqueous sulfuric and hydrochloric acid solutions. this ability allows the transfer of cr(vi) oxanions from the acid media, through an orga...

The extraction efficiency of hexavalent chromium, Cr(VI), from water has been investigated using a vegetable oil based emulsion liquid membrane (ELM) technique. The main purpose of this study was to create a novel ELM formulation by choosing a more environmentally friendly and non-toxic diluent such as palm oil. The membrane phase so formulated includes the mobile carrier tri-n-octylmethylammon...

In microfluidics and other microstructured devices, wettability changes, as a result of component interactions with the solid wall, can have dramatic effects. In emulsion separation and emulsification applications, the desired behavior can even be completely lost. Wettability changes also occur in one phase systems, but the effect is much more far-reaching when using two-phase systems. For micr...

Durability is a long-standing challenge in designing liquid-repellent surfaces. A high-performance omniphobic surface must robustly repel liquids, while maintaining mechanical/chemical stability. However, liquid repellency and mechanical durability are generally mutually exclusive properties for many omniphobic surfaces-improving one performance inevitably results in decreased performance in an...

A design of microfluidic devices is presented to integrate single-mode, liquid-core waveguides with microfluidic channels that generate and deliver disklike emulsion microdroplet cavities doped with an organic dye. The microcavity modes can be directly coupled to the liquid waveguide. Cavity-enhanced spontaneous emission was observed at the waveguide with low pump pulse energy.

the performances of two-phase polymer-liquid pebax®/polyethylene glycol (peg) and three-phase polymer-liquid-solid pebax®/peg/mwnt thin film composite membranes for co2 and ch4 permeation were studied. the effect of temperature and mwnt/pebax® ratio on single gas (co2 and ch4) permeability was investigated. the permeation of both gases was measured at different temperatures from 303 to 323 ˚k. ...

• Substantial reduction of acid accumulation with the coupled process. Great viscosity variations due to transfer. Viscosity changes successfully taken into account describe kinetics. Model-based generalization for process guidelines. Membrane-based reactive extraction as an in situ product recovery technique is a promising strategy intensification, particular case bioproduction organic acids. ...

We provide evidence of single attoliter oil droplet collisions at the surface of an ultra-microelectrode (UME) by the observation of simultaneous electrochemical current transients (i-t curves) and electrogenerated chemiluminescent (ECL) transients in an oil/water emulsion. An emulsion system based on droplets of toluene and tri-n-propylamine (2:1 v/v) emulsified with an ionic liquid and suspen...