We demonstrate that a laser beam converging from a specific transverse mode is a bottle beam, as described in J. Opt. Soc. Am. B 20, 1220 (2003). To our knowledge, this is the first time that a bottle beam has been generated directly from a laser. By calculating the radiation forces on a dielectric Rayleigh sphere in the bottle beam, we show that the single beam can trap high-refractive-index p...

Applying a solenoidal magnetic field to laser ion source is method produce high current beam. In this study, we measured the effect of on time evolution beam emittance using double-slit for source. Ablation plasma was produced by irradiating an Al target with Nd:YAG laser. From measurements, phase difference shown in ellipses increased as applying field. addition, increasing range averaged wave...

An experiment has been conducted to investigate the effect of laser line-narrowing on the performance of an optically pumped cesium beam frequency standard. A two laser scheme (4-+4'u for optical pumping and 4+5'7t. for detection) was used and the lasers were either frequency locked to Cs saturated absorption features in an external cell or linenarrowed by optical feedback from an external Fabr...

The rapid melting of silicon film due to the absorption of a CW laser beam radiation is studied. The silicon film melting and recrystallization is mainly controlled by the temperature distribution in the semiconductor. The enthalpy technique for the solution of phase change problems is used in an explicit finite difference form to calculate the transient temperature distribution in the silicon ...

OBJECTIVE To determine the efficacy of various eye protection measures during carbon dioxide laser laryngoscopy. DESIGN A standard medical mannequin was equipped with indicator paper over the eyes and subjected to multiple passes of direct carbon dioxide laser beam contact at 400-mm focal length with powers ranging from 2.5 to 4.0 W during simulated laser microlaryngoscopy. Several different ...

An extended-cavity diode laser at 852 nm has been built especially for the purpose of cooling and probing cesium atoms. It is a compact, self-aligned, and continuously tunable laser source having a 100-kHz linewidth and 60-mW output power. The electronic control of the laser frequency by the piezodriven external reflector covers a 4.5-kHz bandwidth, allowing full compensation of acoustic freque...

This study presents the fabrication of crystalline indium tin oxide (c-ITO) patterns on glass substrate using laser-induced crystallization followed by chemical etching. In the proposed approach, an amorphous ITO (a-ITO) thin film was transformed into a c-ITO structure over a predetermined area using infrared picosecond fiber laser irradiation with a 500 kHz repetition rate, under a single lase...

In recent years, a number of laser based H beam diagnostics systems have been developed in the Spallation Neutron Source (SNS). This talk reviews three types of laser based diagnostics at SNS: the laser wire profile monitors at superconducting linac (SCL), the laser transverse emittance scanner at high energy beam transport (HEBT), and the laser bunch shape monitor at medium energy beam transpo...

The measurement sensitivity of the pointing direction of a laser beam is ultimately limited by the quantum nature of light. To reduce this limit, we have experimentally produced a quantum laser pointer, a beam of light whose direction is measured with a precision greater than that possible for a usual laser beam. The laser pointer is generated by combining three different beams in three orthogo...

We compute the stationary profiles of a coherent beam of Bose condensed atoms propagating through a guide. Special emphasis is put on the effect of an obstacle present on the trajectory of the beam. The obstacle considered (such as a bend in the guide, or a laser field perpendicular to the beam) results in a repulsive or an attractive potential acting on the condensate. Different behaviors are ...