In this work composite hollow-fibers were prepared by dip-coating of commercial polypropylene (PP) with a thin layer of ethylene–chlorotrifluoroethylene copolymer (ECTFE). The employment of N-methyl pyrrolidone (NMP) as solvent improved the polymer processability favoring dip-coating at lower temperature (135 ◦C). Scanning electron microscopy (SEM) analyses showed that after dip-coating the PP ...

Coating shrinkage upon drying is a phenomenon well known to the paper coating industry where it often causes changes in the final structure of the coating layer, leading to poor results in terms of gloss, light scattering, surface strength, coverage and printability. The aim of this paper is to improve the understanding of coating shrinkage by measuring the forces related to the capillarity, ac...

The electroless deposition method was used to prepare Ni-based nanocomposite coatings, this approach represents an alternate way of having coatings on the different substrates. Most previous literatures subject and work deals with a study effect process conditions and, Bath composition microstructure at macroscale Ni-Al2O3 composite coatings. Though, step structure bath are little, present aims...

introduction: essential oils are used as flavoring agents in various foods. layer-by-layer (lbl) technique is a method in which the material is dipped into a series of different solutions containing oppositely charged polyelectrolytes. the aim of this study is to investigate the effectiveness of a multilayered edible coating with an antimicrobial compound (lemon and peppermint) in enhancing the...

The purpose of this work was to fabricate a multilayer laminin γ2 DNA coating on a titanium surface and evaluate its biological properties. A multilayer laminin γ2 DNA coating was fabricated on titanium using a layer-by-layer assembly technique. The rate of coating degradation was evaluated by detecting the amount of cDNA remaining. Surface analysis using X-ray photoelectron spectroscopy, atomi...

Rhenium Re –Me alloys where Me = Ni, Fe, or Co were deposited galvanostatically. The plating bath consisted of ammonium perrhenate, nickel or cobalt sulfamate, or iron sulfate, citric acid, and magnesium sulfamate. The effects of bath chemistry and deposition time on faradaic efficiency FE , Re content, and partial deposition currents were determined. Rhenium contents as high as 93 atom % or FE...

An experimental protocol for the realization of three-dimensional periodic metallic micro/nanostructures over large areas is presented. Simultaneous fabrication of hundreds of three-dimensional complex polymer structures is achieved using a two-photon photopolymerization (TPP) technique combined with a microlens array. Metallization of the structures is performed through the deposition of thin ...

Electroless nickel is often plated on the surface of aluminum mirrors to improve the ability to polish the mirror surface. Electroless nickel plating can cause a bimetallic effect, creating distortion of a mirror surface if it is heated or cooled. Published data listing the thermal coefficient of expansion and Young’s modulus as a function of temperature for electroless nickel is not readily av...

Electrochemical coating processes are significantly affected by applied magnetic fields due to the generation of electromagnetic forces. The present research work has been undertaken to study the effect of coating parameters such as current density and alumina concentration on the characteristics of Ni-Al2O3 composite coating under static magnetic field. Ni-Al2O3 composite coating was applied o...

Epoxy powder coatings containing zinc aluminum phosphate (ZAP) and zinc phosphate (ZP), which are the 2nd and 1st generation of phosphate-based pigments respectively, were applied to the surface of mild steel sheets. The anticorrosive performances of the coated samples were studied using electrochemical impedance spectroscopy (EIS). Cathodic disbonding resistance and the adhesion performance of...