The online and continuous measurement of velocity, concentration and mass flow rate of pneumatically conveyed solid particles for the high-efficiency utilization of energy and raw materials has become increasingly significant. In this paper, an integrated instrumentation system for the velocity, concentration and mass flow rate measurement of dense phase pneumatically conveyed solid particles b...

an experimental study has been conducted on the hydrodynamics of a stage mixer-settler to obtain an appropriate design. in this paper several tests was performed to investigate full factorial design of experiments. since each test was repeated seven times, the repeatability of the test was confirmed (p=1 bar and t=25 °c). sauter diameter was determined by photographing both the mixer and settle...

Design of a natural dry cooling tower has been accomplished in two sections: the design of heat exchangers and the numerical solution of flow through the tower. Heat exchanger (Heller type) has been simulated thermodynamically and then coupled with a computer program, which calculated the turbulent natural convection flow through the tower. The computer program developed for this purpose can be...

Design of a natural dry cooling tower has been accomplished in two sections: the design of heat exchangers and the numerical solution of flow through the tower. Heat exchanger (Heller type) has been simulated thermodynamically and then coupled with a computer program, which calculated the turbulent natural convection flow through the tower. The computer program developed for this purpose can be...

This paper presents the experimental as well as the simulated performance studies on the transcritical CO2 heat pumps for simultaneous water cooling and heating; effects of water mass flow rates and water inlet temperatures of both evaporator and gas cooler on the cooling and heating capacities, system COP and water outlets temperatures are investigated. Study shows that both the water mass flo...

Two-fluid Dean vortex flow in a coiled pipe with vanishing torsion, and its effect on the mass transfer through the liquid–liquid interface of two immiscible fluids are studied numerically. The liquids are stratified by gravity, with the denser one occupying the lower part of the pipe. The Navier–Stokes equations in both fluid layers are solved numerically by the finite volume method. The resul...

A fully equipped automotive air-conditioning test system consists of 5 main components: a compressor, a condenser, an orifice tube, an evaporator and an accumulator. R-134a is used as refrigerant. The coefficient of performance, evaporator cooling capacity, compressor power consumption, total mass flow rate, vapor mass flow rate, liquid mass flow rate and oil in circulation, pressures and tempe...

The purpose of this paper is to understand the mechanism of non-axisymmetric wall-thinning that caused a pipe break in the pipeline of the Mihama nuclear power plant in 2004. The wall thinning was caused by the flow accelerated corrosion which affects low carbon steel pipelines. The mass transfer rate measurement of the wall thinning behind an office in a curved swirling flow is carried out in ...

This paper reports the effect of superficial liquid mass flow rate and bed void fraction on the pressure drop, dynamic liquid hold-up, mean liquid residence time and biofilm wetting, in a co-current down-flow xylene-removing trickle bed air biofilter (TBAB). The gas–liquid pressure drop increased with liquid mass flow rate and it also increased with diminishing bed void fraction, the effect bei...