Alkali treated Citrus limetta peels were used for recovery of Ga(III) from its aqueous solution. The raw and alkali treated peels were characterized for functional groups. The efficiency of adsorption increased from 47.62 mg/g for raw peels to 83.33 mg/g for alkali treated peels. Between pH 1 and 3, the adsorption increased and thereafter decreased drastically. The adsorption followed pseudosec...

the interaction between some heavy metal ions such as of pb(ii), cd(ii) and cu(ii) ions from aqueous solution adsorbed by single walled carbon nanotube (swcnts) and carboxylate group functionalized single walled carbon nanotube (swcnt-cooh) surfaces were studied by atomic absorption spectroscopy. the effect of contact time, ph, initial concentration of ion, ionic strength and temperature on the...

classical xerogels are robust, inexpensive and nontoxic materials with low-ordered nanoporous structures. in water streams where the ph is higher than the point of zero charge, the surface of classical xerogels such as tetraethoxy orthosilan (teos) xerogel is negatively charged. it was assumed that a xerogel can work as a strong adsorbent for metal ions without further modification. therefore, ...

in this study, a series of laboratory tests were conducted to investigate the efficiency of hydroxyapatite (1-iap)nanopowders towards adsorption of lysozyme from aqueous solution. in the present research. i rp nanopowderssynthesized from egg-shell characterized using sem and ft-ht. the adsorption of lysozyme was i mg/ml using0.1 g adsorbent in 100 ml of lysozyme solution. adsorption data were f...

background and purpose: phenol and derivatives are common pollutants of drinking water which are blamed for crucial adverse effects such as poisoning, cancer, and malformation. in this study, an activated carbon of miswak’s root (mr) was used for the removal of phenol from aqueous solutions as a low-cost and high surface adsorbent. materials and methods: adsorption experiments were then conduct...

Mesoporous carbons were synthesized via both soft and hard template methods and compared to a commercial powder activated carbon (PAC) for the adsorption ability of bisphenol-A (BPA) from an aqueous solution. The commercial PAC had a BET-surface of 1027 m²/g with fine pores of 3 nm and less. The hard templated carbon (CMK-3) material had an even higher BET-surface of 1420 m²/g with an average p...

The effects of polyacrylamide (PAM) molecular weights (MWs) on the PAM adsorption capacities and PAM-mediated flocculation of kaolinite suspensions were investigated using a series of nonionic PAMs with different MWs. Adsorption tests using aqueous kaolinite suspensions dosed with a series of PAMs with MWs of 1.5 kg/mol, 10 kg/mol, 0.6–1 Mg/mol, 5–6 Mg/mol, and 18 Mg/mol (referred to as 1.5 K, ...

in this research, rice husk and activated carbon adsorbents were used for removal of lead ion from aqueous solution at ph= 6. in the batch tests experimental parameters were studied, including contact time and initial metal ions concentration.survey of the equilibrium time at different concentration showed that equilibrium time is reduced with decrease of initial concentration of solution from ...

Synthetic siderite has been used as adsorbent for As(III) removal in this study. Effects of contact time, temperature, pH, co-existing anions on As(III) adsorption were intensively investigated. Adsorption mechanisms were also studied using the X-ray absorption technique. Results show that the maximum adsorption capacity is up to 9.98 mg g(-1) at 25°C at a siderite dosage of 2 g L(-1). Adsorpti...

Biosorption characteristics of Pb(II) ions from aqueous solution were studied using some residues of solvent-extracted Otostegia persica known as goldar residue biomass. The effects of contact time (0–120 min), the initial pH 3–8, biomass dosage (0.53–2.6 g/L) and the initial lead concentration (5–25 mg/L) on biosorption were investigated. The maximum adsorption capacity of 17.3 mg/g at pH 5.5,...