Extraordinary water-repelling properties of superhydrophobic surfaces make them novel candidates for a great variety of potential applications. A general approach to achieve superhydrophobicity requires low-energy coating on the surface and roughness on nano- and micrometre scale. However, typical construction of superhydrophobic surfaces with micro-nano structure through top-down fabrication i...

This research includes testing several different materials for each layer of the five-layer perovskite solar cell (CH3NH3PbI3) and choosing best material in order to obtain highest efficiency cell, as well studying effect both thickness absorption back surface field on performance using computer simulation program (SCAPS1-D), where was adopted an with a (1 µm), titanium dioxide (TiO2) selected ...

The Minnesota Nano Center’s Keller Hall facility includes an atomic layer deposition (ALD) machine that is capable of depositing uniform alumina (Al2O3), hafnium oxide (HfO2), silicon dioxide (SiO2), zinc oxide (ZnO), and titanium dioxide (TiO2). ALD works by building alternate layers on a film using two different precursor gases – one usually supplying the metallic atoms and water vapor (H2O) ...

BACKGROUND In fabrication of ZnO-based low voltage varistor, Bi2O3 and TiO2 have been used as former and grain growth enhancer factors respectively. Therefore, the molar ratio of the factors is quit important in the fabrication. In this paper, modeling and optimization of Bi2O3 and TiO2 was carried out by response surface methodology to achieve maximized electrical properties. The fabrication w...

Within EU FP7 project NANOVALID, the (eco)toxicity of 7 well-characterized engineered nanomaterials (NMs) was evaluated by 15 bioassays in 4 laboratories. The highest tested nominal concentration of NMs was 100 mg/l. The panel of the bioassays yielded the following toxicity order: Ag > ZnO > CuO > TiO2 > MWCNTs > SiO2 > Au. Ag, ZnO and CuO proved very toxic in the majority of assays, assumingly...

In ZnO-based low voltage varistor, the two essential features of microstructure determining its nonlinear response are the formation Bi-enriched active grain boundaries as well as a controlled ZnO grain size by secondary spinel-type phases. Besides, the microstructure and phase composition are strongly affected by the dopant concentration during sintering process. In this study, the optimal dop...

Oxidative damage to cells and tissues from free radicals induced by ultraviolet (UV) irradiation can be attenuated by sunscreen components, such as ZnO and TiO2 nanoparticles (NPs). Although it is known that reactive oxygen species (ROS) are generated by cells upon exposure to ZnO and TiO2 NPs, it is unknown to what extent the amount generated is altered with UV co-exposure. As it is a critical...

Ruthenium N719 is a well-known material used as the dye in commercial dye-sensitized solar cell (DSSC) devices. However, it poses risks to human health and environment over time. On other hand, titanium dioxide (TiO2) has low electron mobility high recombination losses when photoanode this photovoltaic technology device. In addition, using harms health. As an alternative sensitizer compensate o...

Titanium dioxide (TiO2) and zinc oxide (ZnO) nanoparticles (NPs) are promising candidates for numerous applications in consumer products. This will lead to increased human exposure, thus posing a threat to human health. Both these types of NPs have been studied for their cell toxicity, immunotoxicity, and genotoxicity. However, effects of these NPs on epigenetic modulations have not been studie...

Pharmaceuticals have become an important public health issue as environmental pollutants over the last years. After ingestion, pharmaceuticals are partly excreted unchanged. They can reach the wastewater treatment plant (WWTP) via the sewer network. Because the conventional treatments are ineffective in their removal, new methods should be approached, for example semiconductor photocatalysis. S...