Binary nano-composites of Pt and nano-carbon (NC) and Pt and multiwalled carbon nanotube (MWCNT) have been prepared with varied compositions ranging between 20 and 80wt% Pt and investigated them as electrocatalysts for methanol oxidation. The study shows that with the increase in wt% of NC, the apparent electro-catalytic activity of the composite catalyst increases initially, reaches maximum at...

It is reported that the ductility and strength of a metal matrix composite could be concurrently improved if the reinforcing particles were of the size of nanometers and distributed uniformly. In this paper, we revealed that gas atomization solidification could effectively disperse TiB2 nanoparticles in the Al alloy matrix due to its fast cooling rate and the coherent orientation relationship b...

OBJECTIVES To investigate the influence of pre-heating of high-viscosity bulk-fill composite materials on their degree of conversion and shrinkage force formation. METHODS Four bulk-fill composite materials (Tetric EvoCeram Bulk Fill-TECBF, x-tra fil-XF, QuixFil-QF, SonicFill-SF) and one conventional nano-hybrid resin composite (Tetric EvoCeram-TEC) were used. The test materials were either k...

in this research, the effect of different biopolymers such as polyethylene glycol (peg) and polyvinylalcohol (pva) on synthesis and characterization of polymer/cobalt ferrite (cf) nano-composites bymechanical alloying method has been systematically investigated. the structural, morphological andmagnetic properties changes during mechanical milling were investigated by x-ray diffraction (xrd),fo...

Abstract Silicone rubber is an insulating material widely used in DC cable accessories. Its interface a weak area of insulation. Hydrated silica (SiO 2 ·H O) reinforcing agent commonly SR, and its main component SiO . Based on the theory nano-composite dielectric, four kinds composite silicone samples with different filler contents were prepared by taking as liquid matrix. The properties tested...

Abstract With the rapid development of copper-based composite in field electrical contact material industry, problem poor arc erosion resistance becomes more and prominent. Improving is an urgent to be solved. Cu-Al 2 O 3 /30Mo/3SiC 0.5Y /Cu-Al composites were prepared a fast-hot-pressing sintering furnace. The microstructure phase structure analyzed by using scanning electron microscope, trans...

Average stress during shear bond testing, and deformation behaviour during nano-indentation testing were calculated for the bonding area as a bonding site for copolymerization with resin composite in dentine bonding systems. First average stress was calculated in the bonding area between bovine dentine and composite resin. Secondly, the plastic deformation zone size was calculated using an elas...

copper vanadate nanostructures were prepared via ex-situ precipitation approach in presence of schiff-base ligand (n,n׳ -buthylenebis(acetylacetone iminato)dianion = acacbn) as a new capping agent. the effect of different cu sources and ph on the size, morphology and size distribution of copper vanadate nanostructures was investigated. the as-prepared products were characterized using x-ray dif...

a pebax-nano zeolite x mixed matrix membrane was fabricated and operationally characterized using single gas (co2) permeation. x-ray diffraction (xrd) analysis was used to study the arrangement of polymer chains of mixed matrix membrane. the membranes were characterized by scanning electron microscopy (sem) to study cross-sectional morphology. the single gas permeability were carried out for ne...

introduction: resin composites are an important part of restorative treatment in modern dentistry. there are many trademarks available in iran market and physico-chemical properties of many of these resin composites are not evaluated yet. this study was carried out to evaluate the physico-chemical properties of four available resin composites and also to assess the effect of aging on their prop...