Abstract The measurement results of the light-scattering airborne particle counter can effectively evaluate concentration particles in clean environment and confined space, accuracy improvement calibration has attracted more attention. This paper introduces ‘post-collection-check’ way method OPC (Optical Particle Counter), based on FESEM (Field Emission Scanning Electron Microscopy) AAO (Anodic...

Electrochemical current and potential transients were measured during anodic oxidation of aluminum, on time scales of 0.1–100 ms after anodizing began. Aluminum foil samples were prepared by surface treatments yielding oxide films of thickness 5 nm or smaller. A mathematical model was developed for the transients based on steady-state and transient conduction phenomena established for much thic...

This paper presents the development of low cost Nano membrane fabrication system. The system is specially designed for anodic aluminum oxide membrane. This system is capable to perform the processes such as anodization and electro-polishing. The designed machine was successfully tested for ‘mild anodization’ (MA) for 48 hours and ‘hard anodization’ (HA) for 3 hours at constant 0C. The system is...

A new material for microchannel plates (MCP) is proposed — anodic aluminum oxide. Microchannel plates made of this material may be much cheaper than with conventional lead glass MCP. Also a significantly smaller channel diameter (up to 70 nm) is easily achievable, which means better spatial resolution and the possibility to operate in strong magnetic fields. Methods and means are developed for ...

Large area highly uniform and ordered polypyrrole nanowire and nanotube arrays were fabricated by chemical oxidation polymerization with the help of a porous anodic aluminium oxide (AAO) template. Under 0.2 moL/L pyrrole (H2O) and 0.2 moL/L FeCl3 (H2O) pattern, polypyrrole nanowire arrays were obtained after 2.0 hours polymerization reaction in a two-compartment reaction cell. When the reaction...

Capillary condensation in nanoporous anodic aluminum oxide presenting not interconnected pores with controlled modulations is studied using adsorption experiments and molecular simulations. Both the experimental and simulation data show that capillary condensation and evaporation are driven by the smallest size of the nanopore (constriction). The adsorption isotherms for the open and closed por...

A novel interfacial structure consisting of long (up to 5 μm), thin (about 300 nm), highly-ordered, free-standing, highly-reproducible aluminum oxide nanobottles and long tubular nanocapsules attached to a rigid, thin (less than 1 μm) nanoporous anodic alumina membrane is fabricated by simple, fast, catalyst-free, environmentally friendly voltage-pulse anodization. A growth mechanism is propose...