In the design of a large deployable mesh reflector, high surface accuracy is one ultimate goals since it directly determines overall performance reflector. Therefore, evaluation needed in many cases and analysis reflectors. The usually specified as root-mean-square error, which measures deviation geometry from desired working surface. this paper, methods error calculation for reflectors are rev...

Innovative multi-channel synthetic aperture radar (SAR) concepts enable high-resolution wide-swath imaging, but the antenna length typically restricts the achievable swath width. This limitation can be overcome by a novel technique which is based on a single azimuth channel but operates the system with a continuously varied pulse repetition frequency (PRF) by this allowing in principle for arbi...

-A slotted waveguide providing a two dimensional near-field focused beam is presented in this paper. This antenna focuses the beam in the E-plane and provides a wide beam in the H-plane in order to illuminate a linear array, as reflector transmit-array antenna with a small width (100mm) and a very large length (1530mm) located in the near-field region. The simulated field distribution on the ar...

Firstly, the wavelet analysis was used as the filter tool to separate the different scale roughness from the reflector surface testing data, and a mathematical model of the multi-scale roughness was presented to investigate its impact on the radiation characteristic of the reflector antenna. Based on the roughness model, a formulation of density of the far-field was deduced and the definable mo...

Having combined the advantages of ground-based interferometric radar and Global Position System (GPS), a microwave radar with transponder for three-dimensional displacement monitoring method has been proposed. In this system, the active reflector ensures the long measurement distance at low antenna radiation power; the transponder provides the total solutions to antenna microwave leakage and mu...

This paper presents new techniques for simultaneous localization of multiple mobile robots using directional received signal strength (RSS). The RSS data is collected from the XBee wireless module with ZigBee technology. Directional RSS was achieved by a corner reflector antenna installed on the top of each mobile robot. The design parameters of the antenna were chosen by experiments and physic...

During the past few decades, there has been growing interest in the use of microwave and millimeter wave radiometers for remote sensing of the Earth. Due to the need of large antennas and scanning mechanism, the conventional real aperture radiometer becomes infeasible for high spatial resolution application. Interferometric aperture synthesis was suggested as an alternative to real aperture rad...

This thesis investigates the performance of a phased array of antenna elements conforming to a paraboloidal surface. We hypothesize that such a conformal phased array would have performance comparable to that of a correspondingly sized planar array. The performance of a paraboloidal array of antenna elements was simulated using an array program, and the resulting gains, side-lobe levels, and ha...

This paper presents a single layer multi-band reflectarray antenna with circular polarization. The antenna geometry and operation principles are described. The reflectarray design procedure, including antenna elements and offset feed, is illustrated in details. An X band reflectarray prototype is fabricated and measured in the near field system, which realizes a 30.4 dB gain, 53.7% efficiency, ...