We demonstrate the piezoelectric effect on the responsivity of a metal-semiconductor-metal ZnO micro-/nanowire photodetector. The responsivity of the photodetector is respectively enhanced by 530%, 190%, 9%, and 15% upon 4.1 pW, 120.0 pW, 4.1 nW, and 180.4 nW UV light illumination onto the wire by introducing a -0.36% compressive strain in the wire, which effectively tuned the Schottky barrier ...

Increasing performance demands on photodetectors and solar cells require the development of entirely new materials and technological approaches. We report on the fabrication and optoelectronic characterization of a photodetector based on optically-thick films of dense, aligned, and macroscopically long single-wall carbon nanotubes. The photodetector exhibits broadband response from the visible ...

The multi-functional nanomaterial constructed with more than one type of materials has gained a great attention due to its promising application. Here, a high white light photodetector prototype established with two-dimensional material (2D) and 2D nanocomposites has been fabricated. The 2D-2D nanocomposites were synthesized with SnSe nanoplate and graphene. The device shows a linear I-V charac...

Graphene is a promising material for ultrafast and broadband photodetection. Earlier studies have addressed the general operation of graphene-based photothermoelectric devices and the switching speed, which is limited by the charge carrier cooling time, on the order of picoseconds. However, the generation of the photovoltage could occur at a much faster timescale, as it is associated with the c...

Large-area vertical rutile TiO2 nanorod arrays (TNAs) were grown on F/SnO2 conductive glass using a hydrothermal method at low temperature. A self-powered ultraviolet (UV) photodetector based on TiO2 nanorod/water solid-liquid heterojunction is designed and fabricated. These nanorods offer an enlarged TiO2/water contact area and a direct pathway for electron transport simultaneously. By connect...

Several new features were implemented in the RICH detector simulation to improve the realistic detector response: mirror surface inhomogeneities, photodetector coverage with wavelength shifter (WLS) films, collection efficiency of the photodetector. These features mostly influence the ring finder, which was tested in order to obtain limitations for the detector parameters. For this study centra...

In recent years, there is an urgent demand for high-performance ultraviolet photodetectors with high photosensitivity, fast responsivity, and excellent spectral selectivity. In this letter, we report a self-powered photoelectrochemical cell-type UV detector using the ZnO/ZnS core-shell nanorod array as the active photoanode and deionized water as the electrolyte. This photodetector demonstrates...

Abstract. This paper demonstrates the first 4H-SiC metal-semiconductor-metal (MSM) UV photodetector. Two types of MSM photodetectors are fabricated for comparison: one in p-type 4HSiC and the other in n-type 4H-SiC. The n-type SiC photodetectors show a low dark current less than 10nA at -15V bias while the p-type ones show a lower dark current of 0.3nA at -25V. Photoresponsivity is measured fro...

The maximum responsivity of a pure monolayer graphene-based photodetector is currently less than 10 mA W(-1) because of small optical absorption and short recombination lifetime. Here, a graphene hybrid photodetector functionalized with a photoactive ruthenium complex that shows an ultrahigh responsivity of ≈1 × 10(5) A W(-1) and a photoconductive gain of ≈3 × 10(6) under incident optical inten...

In this paper, we report a successful realization and integration of a gold two-dimensional hole array (2DHA) structure with semiconductor InAs quantum dot (QD). We show experimentally that a properly designed 2DHA-QD photodetector can facilitate a strong plasmonic-QD interaction, leading to a 130% absolute enhancement of infrared photoresponse at the plasmonic resonance. Our study indicates tw...